Read the below given statements with respect to three important steps of decomposition: Fragmentation, leaching and catabolism. select the correct option.
(i) Detritivores (e.g., earthworm) breakdown detritus into smaller particles.
(ii) Water soluble inorganic nutrients go down into soil horizon and get precipitated as unavailable salts.
(iii) Decomposers (e.g., bacteria and fungi) secrete digestive enzymes and degrade detritus into simpler inorganic substances.
Read the below given statements with respect to three important steps of decomposition: Fragmentation, leaching and catabolism. select the correct option.
(i) Detritivores (e.g., earthworm) breakdown detritus into smaller particles.
(ii) Water soluble inorganic nutrients go down into soil horizon and get precipitated as unavailable salts.
(iii) Decomposers (e.g., bacteria and fungi) secrete digestive enzymes and degrade detritus into simpler inorganic substances.
(i) Detritivores (e.g., earthworm) breakdown detritus into smaller particles.
(ii) Water soluble inorganic nutrients go down into soil horizon and get precipitated as unavailable salts.
(iii) Decomposers (e.g., bacteria and fungi) secrete digestive enzymes and degrade detritus into simpler inorganic substances.
A
B
B
A
C
C
D
D
Text Solution
Verified by Experts
The correct Answer is:
C
Topper's Solved these Questions
Similar Questions
Explore conceptually related problems
Fragmentation, leaching and catabolism are some of the important steps of decomposition. Study the following statements I , ii and iii regarding these and select the correct option. (i) Detritivores (e.g., earthworm) breakdown detritus into smaller particles. (ii) Water soluble inorganic nutrients go down into soil horizon and get precipitated as unavailable salts. (iii) Decomposers (e.g., bacteria and fungi) secrete digestive enzymes and degrade detritus into simpler inorganic substances.
Read the following statements carefully : ( i ) primary succession is a very slow process taking thousands of years for the climax to be reached. (ii) The energy at a higher trophic level is always more than at a lower level (iii) Bacterial and fungal enzymes degrade detritus into simple inorganic substances. This process is called fragmentation . (iv ) All succession, whether taking place in water or on land, proceeds to a similar climax community : the mesic condition . Which of the two above statements are correct ?
Read the passage given below and answer the question: Biopolymers are polymers that are generated from renewable natural sources, are often biodegradable and nontoxic. They can be produced by biological systems (i.e. microorganisms, plants and animals), or chemically synthesized from biological materials (e.g., sugars, starch, natural fats or oils, etc.). Two strategies are applied in converting these raw materials into biodegradable polymers: extraction of the native polymer from a plant or animal tissue, and a chemical or biotechnological route of monomer polymerization. Biodegradable biopolymers (BDP) are an alternative to petroleum-based polymers (traditional plastics). Some BDP degrade in only a few weeks, while the degradation of others takes several months. In principle the properties relevant for application as well as biodegradability are determined by the molecular structure. According to the American Society for Testing and Materials, biopolymers are degradable polymers in which degradation results from the action of naturally occurring microorganisms such as bacteria, fungi and algae. Polylactic acid (PLA) is an example of biopolymer. It is a thermoplastic polyester. Generally, there are two major routes to produce polylactic acid from the lactic acid (CH_(3)CH(OH) COOH) monomer. The first route involves condensation-water removal by the use of solvent under high vacuum and temperature. This approach produces a low to intermediate molar mass polymer. An alternative method is to remove water under milder conditions, without solvent, to produce a cyclic intermediate dimer, referred to as lactide. This intermediate is readily purified by vacuum distillation. Ring opening polymerization of the dimer is accomplished under heat, again without the need for solvent. By controlling the purity of the dimer it is possible to produce a wide range of molar masses .PLA is a good material for production of clothing, carpet tiles, interior and outdoor furnishing, geotextiles, bags, filtration systems, etc. The primary biodegradability of PLA was tested using hydrolysis tests at various composting temperatures and pH. It was demonstrated that composting is a useful method for PLA biodegradation. The degradation rate is very slow in ambient temperatures. A 2017 study found that at 25^(@)C in sea water, PLA showed no degradation over a year. As a result, it is poorly degraded in landfills and household composts, but is effectively digested in hotter industrial composts. (source: Flieger, M., Kantorová, M., Prell, A., Rezanka, T., & Votruba, J. (2003). Biodegradable plastics from renewable sources. Folia Microbiologica, 48(1), 27 44. doi:10.1007/bf02931273) In the question, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage. Assertion: Lactic acid on polymerisation forms Reason: PLA is used in producing geotextiles.
Read the passage given below and answer the question: Biopolymers are polymers that are generated from renewable natural sources, are often biodegradable and nontoxic. They can be produced by biological systems (i.e. microorganisms, plants and animals), or chemically synthesized from biological materials (e.g., sugars, starch, natural fats or oils, etc.). Two strategies are applied in converting these raw materials into biodegradable polymers: extraction of the native polymer from a plant or animal tissue, and a chemical or biotechnological route of monomer polymerization. Biodegradable biopolymers (BDP) are an alternative to petroleum-based polymers (traditional plastics). Some BDP degrade in only a few weeks, while the degradation of others takes several months. In principle the properties relevant for application as well as biodegradability are determined by the molecular structure. According to the American Society for Testing and Materials, biopolymers are degradable polymers in which degradation results from the action of naturally occurring microorganisms such as bacteria, fungi and algae. Polylactic acid (PLA) is an example of biopolymer. It is a thermoplastic polyester. Generally, there are two major routes to produce polylactic acid from the lactic acid ( CH_(3)CH(OH) COOH ) monomer. The first route involves condensation-water removal by the use of solvent under high vacuum and temperature. This approach produces a low to intermediate molar mass polymer. An alternative method is to remove water under milder conditions, without solvent, to produce a cyclic intermediate dimer, referred to as lactide. This intermediate is readily purified by vacuum distillation. Ring opening polymerization of the dimer is accomplished under heat, again without the need for solvent. By controlling the purity of the dimer it is possible to produce a wide range of molar masses .PLA is a good material for production of clothing, carpet tiles, interior and outdoor furnishing, geotextiles, bags, filtration systems, etc. The primary biodegradability of PLA was tested using hydrolysis tests at various composting temperatures and pH. It was demonstrated that composting is a useful method for PLA biodegradation. The degradation rate is very slow in ambient temperatures. A 2017 study found that at 25^(@)C in sea water, PLA showed no degradation over a year. As a result, it is poorly degraded in landfills and household composts, but is effectively digested in hotter industrial composts. (source: Flieger, M., Kantorová, M., Prell, A., Rezanka, T., & Votruba, J. (2003). Biodegradable plastics from renewable sources. Folia Microbiologica, 48(1), 27 44. doi:10.1007/bf02931273) In the question, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage. Assertion: Biodegradable polymers degrade in few weeks. Reason: Microorganisms bring about degradation of biopolymers.
Read the passage given below and answer the question: Biopolymers are polymers that are generated from renewable natural sources, are often biodegradable and nontoxic. They can be produced by biological systems (i.e. microorganisms, plants and animals), or chemically synthesized from biological materials (e.g., sugars, starch, natural fats or oils, etc.). Two strategies are applied in converting these raw materials into biodegradable polymers: extraction of the native polymer from a plant or animal tissue, and a chemical or biotechnological route of monomer polymerization. Biodegradable biopolymers (BDP) are an alternative to petroleum-based polymers (traditional plastics). Some BDP degrade in only a few weeks, while the degradation of others takes several months. In principle the properties relevant for application as well as biodegradability are determined by the molecular structure. According to the American Society for Testing and Materials, biopolymers are degradable polymers in which degradation results from the action of naturally occurring microorganisms such as bacteria, fungi and algae. Polylactic acid (PLA) is an example of biopolymer. It is a thermoplastic polyester. Generally, there are two major routes to produce polylactic acid from the lactic acid (CH_(3)CH(OH) COOH) monomer. The first route involves condensation-water removal by the use of solvent under high vacuum and temperature. This approach produces a low to intermediate molar mass polymer. An alternative method is to remove water under milder conditions, without solvent, to produce a cyclic intermediate dimer, referred to as lactide. This intermediate is readily purified by vacuum distillation. Ring opening polymerization of the dimer is accomplished under heat, again without the need for solvent. By controlling the purity of the dimer it is possible to produce a wide range of molar masses .PLA is a good material for production of clothing, carpet tiles, interior and outdoor furnishing, geotextiles, bags, filtration systems, etc. The primary biodegradability of PLA was tested using hydrolysis tests at various composting temperatures and pH. It was demonstrated that composting is a useful method for PLA biodegradation. The degradation rate is very slow in ambient temperatures. A 2017 study found that at 25^(@)C in sea water, PLA showed no degradation over a year. As a result, it is poorly degraded in landfills and household composts, but is effectively digested in hotter industrial composts. (source: Flieger, M., Kantorová, M., Prell, A., Rezanka, T., & Votruba, J. (2003). Biodegradable plastics from renewable sources. Folia Microbiologica, 48(1), 27 44. doi:10.1007/bf02931273) In the question, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage. Assertion: Lactic acid undergoes condensation polymerisation Reason: Lactic acid is a bifunctional monomeric unit.
Read the passage given below and answer the question: Biopolymers are polymers that are generated from renewable natural sources, are often biodegradable and nontoxic. They can be produced by biological systems (i.e. microorganisms, plants and animals), or chemically synthesized from biological materials (e.g., sugars, starch, natural fats or oils, etc.). Two strategies are applied in converting these raw materials into biodegradable polymers: extraction of the native polymer from a plant or animal tissue, and a chemical or biotechnological route of monomer polymerization. Biodegradable biopolymers (BDP) are an alternative to petroleum-based polymers (traditional plastics). Some BDP degrade in only a few weeks, while the degradation of others takes several months. In principle the properties relevant for application as well as biodegradability are determined by the molecular structure. According to the American Society for Testing and Materials, biopolymers are degradable polymers in which degradation results from the action of naturally occurring microorganisms such as bacteria, fungi and algae. Polylactic acid (PLA) is an example of biopolymer. It is a thermoplastic polyester. Generally, there are two major routes to produce polylactic acid from the lactic acid (CH_(3)CH(OH) COOH) monomer. The first route involves condensation-water removal by the use of solvent under high vacuum and temperature. This approach produces a low to intermediate molar mass polymer. An alternative method is to remove water under milder conditions, without solvent, to produce a cyclic intermediate dimer, referred to as lactide. This intermediate is readily purified by vacuum distillation. Ring opening polymerization of the dimer is accomplished under heat, again without the need for solvent. By controlling the purity of the dimer it is possible to produce a wide range of molar masses .PLA is a good material for production of clothing, carpet tiles, interior and outdoor furnishing, geotextiles, bags, filtration systems, etc. The primary biodegradability of PLA was tested using hydrolysis tests at various composting temperatures and pH. It was demonstrated that composting is a useful method for PLA biodegradation. The degradation rate is very slow in ambient temperatures. A 2017 study found that at 25^(@)C in sea water, PLA showed no degradation over a year. As a result, it is poorly degraded in landfills and household composts, but is effectively digested in hotter industrial composts. (source: Flieger, M., Kantorová, M., Prell, A., Rezanka, T., & Votruba, J. (2003). Biodegradable plastics from renewable sources. Folia Microbiologica, 48(1), 27 44. doi:10.1007/bf02931273) In the question, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage. Assertion: The degradation of PLA is very slow in ambient temperature. Reason: PLA is a thermoplastic.
Read the passage given below and answer the question: Biopolymers are polymers that are generated from renewable natural sources, are often biodegradable and nontoxic. They can be produced by biological systems (i.e. microorganisms, plants and animals), or chemically synthesized from biological materials (e.g., sugars, starch, natural fats or oils, etc.). Two strategies are applied in converting these raw materials into biodegradable polymers: extraction of the native polymer from a plant or animal tissue, and a chemical or biotechnological route of monomer polymerization. Biodegradable biopolymers (BDP) are an alternative to petroleum-based polymers (traditional plastics). Some BDP degrade in only a few weeks, while the degradation of others takes several months. In principle the properties relevant for application as well as biodegradability are determined by the molecular structure. According to the American Society for Testing and Materials, biopolymers are degradable polymers in which degradation results from the action of naturally occurring microorganisms such as bacteria, fungi and algae. Polylactic acid (PLA) is an example of biopolymer. It is a thermoplastic polyester. Generally, there are two major routes to produce polylactic acid from the lactic acid (CH_(3)CH(OH) COOH) monomer. The first route involves condensation-water removal by the use of solvent under high vacuum and temperature. This approach produces a low to intermediate molar mass polymer. An alternative method is to remove water under milder conditions, without solvent, to produce a cyclic intermediate dimer, referred to as lactide. This intermediate is readily purified by vacuum distillation. Ring opening polymerization of the dimer is accomplished under heat, again without the need for solvent. By controlling the purity of the dimer it is possible to produce a wide range of molar masses .PLA is a good material for production of clothing, carpet tiles, interior and outdoor furnishing, geotextiles, bags, filtration systems, etc. The primary biodegradability of PLA was tested using hydrolysis tests at various composting temperatures and pH. It was demonstrated that composting is a useful method for PLA biodegradation. The degradation rate is very slow in ambient temperatures. A 2017 study found that at 25 ^(@)C in sea water, PLA showed no degradation over a year. As a result, it is poorly degraded in landfills and household composts, but is effectively digested in hotter industrial composts. (source: Flieger, M., Kantorová, M., Prell, A., Rezanka, T., & Votruba, J. (2003). Biodegradable plastics from renewable sources. Folia Microbiologica, 48(1), 27 44. doi:10.1007/bf02931273) In the question, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage. Assertion: PLA is poorly degraded in landfills. Reason: The degradation rate of PLA is very slow in ambient temperatures.
NTA MOCK TESTS-NEET MOCK TEST 10-BIOLOGY
- Which of the following type of gynoecium is associated with wind polli...
Text Solution
|
- A reduction in the quantity of oxygen evolution during photosynthesis ...
Text Solution
|
- Read the below given statements with respect to three important steps ...
Text Solution
|
- The correct statements about the working of oral pills are: (i) Inhi...
Text Solution
|
- Species diversity generally increases as one proceeds from
Text Solution
|
- In tissue culture experiments of tobacco callus, it was seen that when...
Text Solution
|
- In human beings, the color of skin is controlled by
Text Solution
|
- Given below is the diagrammatic representation of a sarcomere. Mark th...
Text Solution
|
- A nematode Meloidogyne infects the roots of tobacco plants and causes ...
Text Solution
|
- Which one of the following is correctly matched?
Text Solution
|
- Transgenic crops are modified through genetic engineering to develop n...
Text Solution
|
- Given below is a list of various diseases // disorders. a. Phenylket...
Text Solution
|
- Which of the following set of coenzymes are nucleotides of vitamin nia...
Text Solution
|
- The classification of organisms based on chromosome number is called
Text Solution
|
- Biological oxygen demand (BOD) is a measure of
Text Solution
|
- Which of the following statement // s is // are correct about crack?
Text Solution
|
- In many cells ribosomes occur in chains along messenger RNA. What is t...
Text Solution
|
- NADP^(+) is reduced to NADPH in
Text Solution
|
- Which type of white blood cells are concerned with the release of hist...
Text Solution
|
- The macronutrient which is an essential component of all organic compo...
Text Solution
|