Home
Class 12
PHYSICS
The number of circular divisions of show...

The number of circular divisions of shown screw gauge are 50. It moves 0.5 mm on main scale in one rotation. The diameter of the ball is:

A

2. 25 mm

B

2.20 mm

C

1.20 mm

D

1.25 mm

Text Solution

Verified by Experts

The correct Answer is:
C
Promotional Banner

Similar Questions

Explore conceptually related problems

In a screw gauge, the zero of mainscale coincides with fifth division of circular scale in figure (i). The circular division of screw gauge are 50 . It moves 0.5 mm on main scale In one rotation. The diameter of the ball in figure (ii) is

The number of circular divisions on the shown screw gauge is 50 it moves 0.5mm on main scale for moone complete rotation Main scale reading is 2 The diameter of the balls is .

The circular scale of a screw gauge has 50. divisions and pitch of 0.5 mm. Main scale reading is 2. Find the diameter of sphere.

The circular scale head of a screw gauge is divided into 200 divisions and move 1 mm ahead in one revolution. The diameter of the wire, when the pitch scale reading shows 6mm (when the wire is firmly held between the studes) and 45^(th) division on circular scale coincides with the reference line.

Circular scale of a screw gauge moves through 4 divisions of main scale in one rotation. If the number of divisions on the circular scale is 200 and each division of the main scale is 1 mm., the least count of the screw gauge is

The circular scale of a screw gauge has 50 divisions and pitch of 0.5 mm. Find the diameter of sphere. Main scale reading is 2 -

The pitch of a screw gauge is 0.5 mm. It's head scale contains 50 divisions. The least count of the screw gauge is

Two full turns of the circular scale of a screw gauge cover a distance of 1mm on its main scale. The total number of divisions on the circular scale is 50 . Further, it is found that the screw gauge has a zero error of - 0.03mm . While main scale reading of 3mm and the number of circular scale divisions in line with the main scale as 35 . the dimeter of the wire is

The pitch and the number of divisions, on the circular scale, for a given screw gauge are 0.5 mm and 100 respectively without any object, the zero of its circular scale lies 3 divisions below the mean line. The readings of the main scale and the circular scale, for a thin sheet, are 5.5 mm and 48 respectively, the thickness of this sheet is :

A screw gauge has 50 divisions on its circular scale and its screw moves by 1 mm on turning it by two rotations. When the flat end of the screw is in contact with the stud, the zero of circular scale lies below the base line and 4th division of circular scale is in line with the base line. Find the pitch.