Elements of an electronic communication system
• Information (Baseband or input signal)
Information can be in the form of a sound signal like speech, music, pictures, or computer data which is given as input to the input transducer. Transmission
Reception
• Input transducer
A transducer is a device that converts variations in a physical quantity (prese temperature, sound) into an equivalent electrical signal or vice versa. In communistem, the transducer converts the information which is in the form of sound pictures or computer data into corresponding electrical signals. The electrical equival of the original information is called the baseband signal. The best example for transducer is the microphone that converts sound energy into electrical energy.
• Transmitter
It feeds the electrical signal from the transducer to the communication channel. It consists of circuits such as amplifier, oscillator, modulator, and power amplifier. The transmitter is located at the broadcasting station.
Amplifier: The transducer output is very weak and is amplified by the amplifier.
Oscillator: It generates high-frequency carrier wave (a sinusoidal wave) for long distance transmission into space. As the energy of a wave is proportional to its frequency, the carrier wave has very high energy
Modulator: It superimposes the baseband signal onto the carrier signal and generates the modulated signal ,
Power amplifier: It increases the power level of the electrical signal in order to cover a large distance. • Transmitting antenna It radiates the radio signal into space in all directions. It travels in the form of electromagnetic waves with the velocity of light `(3xx10^(8)ms^(-1))`.
• Communication channel Communication channel is used to carry the electrical signal from transmitter to receiver with less noise or distortion. The communication medium is basically of two types wireline communication and wireless communication.
NoiseIt is the undesirable electrical signal that interfaces with the transmitted signal. Noise attenuates or reduces the quality of the transmitted signal. It may be man-made automobiles, welding machines, electric motors etc.) or natural (lightening, radiation from sun and stars and environmental effects). Noise cannot be completely eliminates. However, it can be reduced using various techniques.
Receiver The signals that are transmitted through the communication the help of a receiving antenna and are fed into the receive vacation medium are received with the receiver. The receiver consists of electronic circuits like demodulator. amplifier det er, delector etc. The demodulator extraces the baseband signal from the carrier signal. Then hen the baseband signal is detected and amplified using amplifiers. Finally, it is fed te amplifiers. Finally, it is fed to the output transducer.
• Repeaters Repeaters are used to increase the range or distance through which the signals are sent. It is a combination of transmitter and receiver. The signals are received, amplified, and retransmitted with a carrier signal of different frequency to the destination. The best example is the communication satellite in space.
• Output transducer It converts the electrical signal back to its original form such as sound, music, pictures or data. Examples of output transducers are loudspeakers, picture tubes, computer monitor, etc.
• Attenuation The loss of strength of a signal while propagating through a medium is known as attenuation.
• Range It is the maximum distance between the source and the destination up to which the signal is received with sufficient strength.
