53. The resistors R1, R2, Rz and Re in the figure given below are all equal 50 resis 2A 41. 42 43. () thiruth What would you expect the voltmeters A, B and C to read assuming that the connecting wires in the circuit have negligible resistance ? Torciconcaf 14 ore

The resistors R_(1),R_(2),R_(3) and R_(4) in the figure given below are all equal in value. What would you expect the voltmeters A,B and C to read assuming that the connecting wires in the circuit have negligible resistance ?

In the circuit diagram given in figure suppose the resistors R_1, R_2 and R_3 have the values 5Omega, 10 Omega, 30 Omega respectively, which have been connected to a battery of 12V. Calculate (a) the current through each resistor, (b) the total current in the circuit, and (c) the total circuit resistance.

For three circuits, shown here the same two resistors R_(1) and R_(2) have been connected in parallel in all the circuits but the voltmeter and the ammeter have been connected in three different positions. The relation between the three voltmeter and ammeter readings would be :

Three resistors R_1, R_2 and R_3 are to be combined to form an electrical circuit as shown in the figure. It is found that when R_1 R_2 and R_3 are put respectively in positions A, B and C, the effective resistance of the circuit is 70 Omega When R_2, R_3 and R_1 are put respectively in position A, B and C the effective resistance is 35 Omega and when R_3, R_1 and R_2 are respectively put in the position A, B and C, the effective resistance is 42 Omega If R_(1), R_(2 )and R_(3) are all connected in parallel, the effective resistance will be

Three resistors R_1, R_2 and R_3 are to be combined to form an electrical circuit as shown in the figure. It is found that when R_1 R_2 and R_3 are put respectively in positions A, B and C, the effective resistance of the circuit is 70 Omega When R_2, R_3 and R_1 are put respectively in position A, B and C the effective resistance is 35 Omega and when R_3, R_1 and R_2 are respectively put in the position A, B and C, the effective resistance is 42 Omega If R_(1), R_(2) and R_(3) are put in series, the effective resistance will be

Three resistors R_1, R_2 and R_3 are to be combined to form an electrical circuit as shown in the figure. It is found that when R_1 R_2 and R_3 are put respectively in positions A, B and C, the effective resistance of the circuit is 70 Omega When R_2, R_3 and R_1 are put respectively in position A, B and C the effective resistance is 35 Omega and when R_3, R_1 and R_2 are respectively put in the position A, B and C, the effective resistance is 42 Omega The resistance R_(1): R_(2): R_(3 ) are in the ratio