Home
Class 11
PHYSICS
[" 13.A spectrometer gives the following...

[" 13.A spectrometer gives the following reading when used to "],[" measure the angle of a prism."],[" Main scale reading: "58.5" degree "],[" Vernier scale reading: "09" divisions "],[" Given that "1" division on main scale corresponds to "0.5" degree."],[" Total divisions on the Vernier scale is "30" and match with "29],[" divisions of the main scale.The angle of the prism from the "],[" above data: "],[[" (a) "58.59" degree "," (b) "58.77" degree "],[" (c) "58.65" degree "," (d) "59" degree "]]

Promotional Banner

Similar Questions

Explore conceptually related problems

A spectrometer gives the following reading when used to measure the angle of a prism. Main scale reading =58.5 degree Vernier scale reading =0.9 divisions Given that 1 divisions on main scale corresponds to 0.5 degree. Total divisions on the vernier scale is 30 and match with 29 divisions of the main scale. the angle of the prism from the above data is :

A spectrometer gives the following reading when used to measure the angle of a prism. Main scale reading =58.5 degree Vernier scale reading =0.9 divisions Given that 1 divisions on main scale corresponds to 0.5 degree. Total divisions on the vernier scale is 30 and match with 29 divisions of the main scale. the angle of the prism from the above data is :

A spectrometer gives the following reading, when used to measure the angle of a prism. Main scale reading = 58.5^(@) , Vernier scale reading = 09 division Given that 1 division on main scale corresponding to 0.5^(@) . Total division on the vernier scale is 30 and match with 29 divisions on the main scale. The angle of the prism, from the above data is

A screw gauge gives the following reading when used to measure the diameter of a wire. Main scale reading : 0 mm Circular scale reading : 52 divisions Given that 1 mm on main scale corresponds to 100 divisions of the circular scale. The diameter of wire from the above data is :

A screw gauge gives , the following reading when used to measure the diameter of a wire main scale reading : 0 mm Circular scale reading : 52 divisions Given that 1 mm on main scale corresponds to 100 divisions of the circular scale. The diameter of wire from the above data is

A screw gauge gives the following reading when used to measure the diameter of a wire. Main scale reading =0mm , circular scale reading =52 divisions. Given that 1mm on main scale corresponds to 100 divisions of the circular scale. The diameter of the wire from the above data is

A screw gauge gives the following reading when used to measure the diameter of a wire. Main scale reading =0mm , circular scale reading =52 divisions. Given that 1mm on main scale corresponds to 100 divisions of the circular scale. The diameter of the wire from the above data is