The elastic limit of stees is `8xx10^8Nm^-2` andits Young modulus `2x10^11Nm^-2`. Find the maximum eleongatin of a half metre steel wire that can be given without exceeding the elastic limit.

The elastic limit of steel is 8xx10^8Nm^-2 and its Young modulus 2xx10^11Nm^-2 . Find the maximum elongation of a half meter steel wire that can be given without exceeding the elastic limit.

The elastic limit of steel is 8xx10^8Nm^-2 and its Young modulus 2xx10^11Nm^-2 . Find the maximum elongation of a half meter steel wire that can be given without exceeding the elastic limit.

Within the elastic limit, stress of brass is 3.5xx10^(10)N//m^(2) . Find the maximum load that can be applied to a brass wire of 0.75 mm diameter without exceeding the elastic limit.

Within the elastic limit, stress of brass is 3.5xx10^(10)N//m^(2) . Find the maximum load that can be applied to a brass wire of 0.75 mm diameter without exceeding the elastic limit.

The elastic limit of a steel cable is 3.0xx10^(8) N//m^(2) and the cross-section area is 4 cm^(2) . Find the maximum upward acceleration that can be given to a 900 kg elevator supported by the cable if the stress is not to exceed one - third of the elastic limit.

The elastic limit of a steel cable is 3.0xx10^(8) N//m^(2) and the cross-section area is 4 cm^(2) . Find the maximum upward acceleration that can be given to a 900 kg elevator supported by the cable if the stress is not to exceed one - third of the elastic limit.

The stress for elastic limit of a material is 3.5 times 10^8 Nm^-2 . The minimum diameter of a rod made of this material which can support 500 N load without exceeding elastic limit will be :

The stress for elastic limit of a material is 3.5times10^(8)N/m^(2) .The minimum diameter of a rod made of this material which can support 500N load without exceeding elastic limit will be

Young's modulus of silver is 7.25 times 10^10 N.m^-2 and its bulk modulus is 11 times 10^10 N.m^-2 . Find the poisson's ratio for silver.