Home
Class 12
PHYSICS
In an LCR circuit voltages across R,L an...

In an LCR circuit voltages across R,L and C are 10V,10V and 20V respectively. Voltage between the two end points of the whole combination is

A

30V

B

`10sqrt3V`

C

20V

D

`10sqrt2V`

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Topper's Solved these Questions

  • ALTERNATING CURRENT

    CHHAYA PUBLICATION|Exercise EXERCISE (Very Short Answer Type)|35 Videos

  • ALTERNATING CURRENT

    CHHAYA PUBLICATION|Exercise EXERCISE ( Short Answer Type-I)|18 Videos

  • ALTERNATING CURRENT

    CHHAYA PUBLICATION|Exercise NCERT TEXTBOOK QUESTIONS WITH ANSWER HINT (MCQ-2)|4 Videos

  • CHHAYA PUBLICATION|Exercise EXAMPLE|1 Videos

  • ATOM

    CHHAYA PUBLICATION|Exercise CBSE SCANNER|18 Videos

Similar Questions

Explore conceptually related problems

In an LCR series circuit, the rms voltages across R, L and C are found to be 10 V, 10 V and 20 V respectively. The rms voltage across the entire combination is

An alternating voltage 5V of frequency 50 Hz is connected to a series LCR circuit. The potential difference across the inductor and resistor are 6V and 4V respectively. What is the voltage across the capacitor (in V)?

A series LCR circuit containing a resistance of 120Omega has angular resonance frequency 4times10^5rad//s .At resonance, the voltages across resistance and inductancr are 60V and 40V, respectively. Find the values of L and C. At what frequency , does not current in the circuit lag behind the voltage by 45^@ ?

The rms values of the terminal potential differences of R ,L and C of a series circuit are 80V ,70V and 10V respectively.What is the rms value of the applied emf in the circuit?

The radii of two spheres are 10 cm and 40 cm , and their potentials are 40 V and 10 V, respectively. What will be their common potential if they are connected by a conducting wire?

Transformer is a device used to increase or decrease the voltage in the transmission line according to requirement, Generally the input line voltage is fed in a primary coil and the output line voltage is obtained from the terminals of another coil In an ideal transformer, the primary and secondary coils are linked is such a way that there is no loss of magnetic flux and electrical energy. In an ideal transformer, if the number of turns and input voltage across the terminals of the primary coils be N_1 and V_1 , then the output voltage at the two terminals of the secondary coil V_2=V_1.N_2/N_1 , where N_2 is the number of turns in the secondary coil . The ratio of number of turns of the primary and secondary coils of an ideal transformer is 2:1 IF the input voltage is 440 V, then output voltage is if the input power of the transformer be 44 W, then output power is In the above mentioned transformer the input and output currents are respectively.

Two capacitors of capacitances 5muF" and "10muF are charged to 16V and 10V respectively. Find what will be the common potential when they are connected in parallel to each other.

Resistance , inductive reactance and capacitative reactance of an LCR series ac circuit are 30Omega , 60Omega and 20Omega respectively. What is the phase difference between the ac-voltage and current in the circuit?

CHHAYA PUBLICATION-ALTERNATING CURRENT -EXERCISE (Multiple Choice Question)
  1. The reactance of an inductor of inductance 1/piH at frequency 50 Hz is

    Text Solution

    |

  2. Which quantity in an ac circuit is not dependent on frequency?

    Text Solution

    |

  3. The condition of getting maximum current in an LCR series circuit is

    Text Solution

    |

  4. The series resonant frequency of an LCR circuit is f. IF the capacitan...

    Text Solution

    |

  5. A coil has resistance 30 Omega and inductive reactance 20 Omega at 50 ...

    Text Solution

    |

  6. A fully charged capacitor C with initial charge q0 is connected to a ...

    Text Solution

    |

  7. A voltage V0sinomegat is applied across a series combination of resist...

    Text Solution

    |

  8. When an ideal choke is connected to an ac source of 100V and 50Hz, a c...

    Text Solution

    |

  9. In an LCR circuit voltages across R,L and C are 10V,10V and 20V respec...

    Text Solution

    |

  10. In an ac circuit alternating voltage E=200sqrt2 sin 100t volt is conne...

    Text Solution

    |

  11. The power factor of an LR circuit carrying an ac of angular frequency ...

    Text Solution

    |

  12. One of the condions to get a wattless current in an ac circuit is

    Text Solution

    |

  13. If an emf=E=E0cosomegat is applied to a circuit, the current becomes I...

    Text Solution

    |

  14. In an ac circuit , V and I are given by V=100sin(100t)V,and I=100sin (...

    Text Solution

    |

  15. The inductance and capacitance in a closed circuit are 20 mH and 2muF ...

    Text Solution

    |

  16. For an LC oscillator which one of the followings is not true?

    Text Solution

    |

  17. An ideal transformer is used to decrease an alternating voltage from 8...

    Text Solution

    |

  18. The core of any transformer is laminated so as to

    Text Solution

    |

  19. In a non -ideal transformer the primary and secondary voltages and cur...

    Text Solution

    |

  20. The turns ratio of an ideal transformer is 1:n. the input to output po...

    Text Solution

    |