The resistance of a galvanometer is 90 ohm s. If only 10 percent of the main current may flow through the galvanometer, in which way and of what value, a resistor is to be used

The resistance of a galvanometer is 90 ohms. If only 10 percent of the main current may flow through the galvanometer, in which way and of what value, a resistor is to be used ?

The resistance of a galvanometer is 4052 Omega . What shunt must be connected so that 1% of the total current will flow through the galvanometer?

A galvanometer of resistance 100ohms is shunted so that only 1//11 of the main current flows through the galvanometer. The resistance of the shunt is

A galvanometer of resistance 150 ohm is shunted such that only 1/11 of the main current flows through the galvanometer. The resistance of the shunt is, (in ohm)

The resistance of a moving coil galvanometer is 50 ohm and the maximum current which can be passed through the galvanometer is 0.002 A. What resistance (in ohm) must be connected to it order to convert in into an ammeter of range 0-0.5A?

A galvanometer of resistance 20Omega is shunted by a 2 Omega resistor. What part of the main current flows through the galvanometer ?

A shunt is connected with a galvanometer in such a way that 1/90 part of the main current flows through the galvanometer.IF another shunt replaces the previous one then galvanometer current decreases by 10%. IF the main current in each case be the same then what percent of the first will be the resistance of the second shunt?

A moving coil galvanometer has a resistance of 900 ohm. In order to send only 10% of the main current through this galvanometer, the resistance of the required shunt is