Pollen grains that would easily germinate on stigma are found to germinate in vitro, only when 10-200 p p m of boric acid is added. This suggest that
Pollen grains that would easily germinate on stigma are found to germinate in vitro, only when 10-200 p p m of boric acid is added. This suggest that
A
boron accelerates protein synthesis in pollen grain
B
boron has an abrasive effect on the exine
C
boric acid serves as a solvent for sporopollenins
D
pollen wall is boron deficient and high levels of boron occour in the style and stigma.
Text Solution
Verified by Experts
The correct Answer is:
D
During in vitro pollen grain germination among inorganic substanes, boron, in the form of boric acid or borate, has most dramatic effect on pollen germination and pollen tube growth. Pollen of most species are dificient in boron content. In nature, this deficiency is made up by comparatively high levels of boron in the stigma and style. When such pollen grains are grown in vitro high amounts of boron (10-200p pm) are suppied exogenously. Boron reduced bursting of pollen tubed as well as enhances percentage germination and pollen tube growth. some of the role attributed to boron are:
(i) Effect on water relationship and, thus, preventing pollen tube bursting.
(ii) Translocation of sugars.
(iii) Direct or indirect influence on enzymatic steps in the biosynthesis of carbohydrates.
(i) Effect on water relationship and, thus, preventing pollen tube bursting.
(ii) Translocation of sugars.
(iii) Direct or indirect influence on enzymatic steps in the biosynthesis of carbohydrates.
Topper's Solved these Questions
Similar Questions
Explore conceptually related problems
Read the passage given below and answer the question: Industrially widely applied esterification reactions are commonly catalysed using mineral liquid acids, such as sulphuric acid and p-toluenesulphonic acid. The catalytic activity of homogeneous catalysts is high. They suffer, however, from several drawbacks, such as their corrosive nature, the existence of side reactions, and the fact that the catalyst cannot be easily separated from the reaction mixture. The use of solid acid catalysts offers an alternative and has received a lot of attention in the past years. Solid acid catalysts are not corrosive and, coated onto a support, they can be easily reused. Examples of solid acid catalysts used in esterification reactions include ion-exchange resins, zeolites and superacids like sulphated zirconia and niobium acid. Ion-exchange resins are the most common heterogeneous catalysts used and have proven to be effective in liquid phase esterification and etherification reactions. Because of their selective adsorption of reactants and swelling nature, these resins not only catalyse the esterification reaction but also affect the equilibrium conversion. Shortcomings include insufficient thermal resistance, which limits the reaction temperature to 120^(@)C , preventing widespread use in industry. Zeolites, like Y, X, BEA, ZSM-5 and MCM 41 offer an interesting alternative and have proven to be efficient catalysts for esterification reactions. Zeolites have found wide application in oil refining, petrochemistry and in the production of fine chemicals. Their success is based on the possibility to prepare zeolites with strong Brønsted acidity that can be controlled within a certain range, combined with a good resistance to high reaction temperatures. In this study, the activity of various commercial available solid acid catalysts is assessed with respect to the esterification of acetic acid with butanol. The ion-exchange resins Amberlyst 15 and Smopex-101, the acid zeolites H-ZSM-5, H-MOR, H-BETA and H-USY, and the solid superacids sulphated zirconia and niobium acid are selected. Comparative esterification experiments have been carried out using the homogeneous catalysts sulphuric acid, p toluenesulphuric acid and a heteropolyacid (HPA). The weight-based activity of the heterogeneous catalysts tested is maximum for Smopex 101. The following table gives the activity of different catalysts in the esterification reaction between acetic acid and butanol at 75^(@)C . Here: k_(obs) : observed reaction rate constant ( m^(3) mol^(-1)s^(-1) ) kc catalysed reaction rate constant ( m^(3)mol^(-1) g_(cat)^(-1)s^(-1) ) Please note: k c = k obs/ amount (in g) (source: PETERS, T., BENES, N., HOLMEN, A., & KEURENTJES, J. (2006). Comparison of commercial solid acid catalysts for the esterification of acetic acid with butanol. Applied Catalysis A: General, 297(2), 182-188. doi:10.1016/j.apcata.2005.09.00) Catalysts used in oil refining industry are:
Read the passage given below and answer the question: Industrially widely applied esterification reactions are commonly catalysed using mineral liquid acids, such as sulphuric acid and p-toluenesulphonic acid. The catalytic activity of homogeneous catalysts is high. They suffer, however, from several drawbacks, such as their corrosive nature, the existence of side reactions, and the fact that the catalyst cannot be easily separated from the reaction mixture. The use of solid acid catalysts offers an alternative and has received a lot of attention in the past years. Solid acid catalysts are not corrosive and, coated onto a support, they can be easily reused. Examples of solid acid catalysts used in esterification reactions include ion-exchange resins, zeolites and superacids like sulphated zirconia and niobium acid. Ion-exchange resins are the most common heterogeneous catalysts used and have proven to be effective in liquid phase esterification and etherification reactions. Because of their selective adsorption of reactants and swelling nature, these resins not only catalyse the esterification reaction but also affect the equilibrium conversion. Shortcomings include insufficient thermal resistance, which limits the reaction temperature to 120^(@)C , preventing widespread use in industry. Zeolites, like Y, X, BEA, ZSM-5 and MCM 41 offer an interesting alternative and have proven to be efficient catalysts for esterification reactions. Zeolites have found wide application in oil refining, petrochemistry and in the production of fine chemicals. Their success is based on the possibility to prepare zeolites with strong Brønsted acidity that can be controlled within a certain range, combined with a good resistance to high reaction temperatures. In this study, the activity of various commercial available solid acid catalysts is assessed with respect to the esterification of acetic acid with butanol. The ion-exchange resins Amberlyst 15 and Smopex-101, the acid zeolites H-ZSM-5, H-MOR, H-BETA and H-USY, and the solid superacids sulphated zirconia and niobium acid are selected. Comparative esterification experiments have been carried out using the homogeneous catalysts sulphuric acid, p toluenesulphuric acid and a heteropolyacid (HPA). The weight-based activity of the heterogeneous catalysts tested is maximum for Smopex 101. The following table gives the activity of different catalysts in the esterification reaction between acetic acid and butanol at 75^(@)C . Here: k_(obs) : observed reaction rate constant ( m^(3) mol^(-1)s^(-1) ) kc catalysed reaction rate constant ( m^(3)mol^(-1) g_(cat)^(-1)s^(-1) ) Please note: k c = k obs/ amount (in g) (source: PETERS, T., BENES, N., HOLMEN, A., & KEURENTJES, J. (2006). Comparison of commercial solid acid catalysts for the esterification of acetic acid with butanol. Applied Catalysis A: General, 297(2), 182-188. doi:10.1016/j.apcata.2005.09.00) The weight-based activity of the heterogeneous catalysts tested decreases in the following order:
Read the passage given below and answer the question: Industrially widely applied esterification reactions are commonly catalysed using mineral liquid acids, such as sulphuric acid and p-toluenesulphonic acid. The catalytic activity of homogeneous catalysts is high. They suffer, however, from several drawbacks, such as their corrosive nature, the existence of side reactions, and the fact that the catalyst cannot be easily separated from the reaction mixture. The use of solid acid catalysts offers an alternative and has received a lot of attention in the past years. Solid acid catalysts are not corrosive and, coated onto a support, they can be easily reused. Examples of solid acid catalysts used in esterification reactions include ion-exchange resins, zeolites and superacids like sulphated zirconia and niobium acid. Ion-exchange resins are the most common heterogeneous catalysts used and have proven to be effective in liquid phase esterification and etherification reactions. Because of their selective adsorption of reactants and swelling nature, these resins not only catalyse the esterification reaction but also affect the equilibrium conversion. Shortcomings include insufficient thermal resistance, which limits the reaction temperature to 120^(@)C , preventing widespread use in industry. Zeolites, like Y, X, BEA, ZSM-5 and MCM 41 offer an interesting alternative and have proven to be efficient catalysts for esterification reactions. Zeolites have found wide application in oil refining, petrochemistry and in the production of fine chemicals. Their success is based on the possibility to prepare zeolites with strong Brønsted acidity that can be controlled within a certain range, combined with a good resistance to high reaction temperatures. In this study, the activity of various commercial available solid acid catalysts is assessed with respect to the esterification of acetic acid with butanol. The ion-exchange resins Amberlyst 15 and Smopex-101, the acid zeolites H-ZSM-5, H-MOR, H-BETA and H-USY, and the solid superacids sulphated zirconia and niobium acid are selected. Comparative esterification experiments have been carried out using the homogeneous catalysts sulphuric acid, p toluenesulphuric acid and a heteropolyacid (HPA). The weight-based activity of the heterogeneous catalysts tested is maximum for Smopex 101. The following table gives the activity of different catalysts in the esterification reaction between acetic acid and butanol at 75^(@)C . Here: k_(obs) : observed reaction rate constant ( m^(3) mol^(-1)s^(-1) ) kc catalysed reaction rate constant ( m^(3)mol^(-1) g_(cat)^(-1)s^(-1) ) Please note: k c = k obs/ amount (in g) (source: PETERS, T., BENES, N., HOLMEN, A., & KEURENTJES, J. (2006). Comparison of commercial solid acid catalysts for the esterification of acetic acid with butanol. Applied Catalysis A: General, 297(2), 182-188. doi:10.1016/j.apcata.2005.09.00) The catalytic activity of homogeneous catalysts is high. The weight based activity of HPA is less than which of the following heterogenous catalysts?
Read the passage given below and answer the question: Industrially widely applied esterification reactions are commonly catalysed using mineral liquid acids, such as sulphuric acid and p-toluenesulphonic acid. The catalytic activity of homogeneous catalysts is high. They suffer, however, from several drawbacks, such as their corrosive nature, the existence of side reactions, and the fact that the catalyst cannot be easily separated from the reaction mixture. The use of solid acid catalysts offers an alternative and has received a lot of attention in the past years. Solid acid catalysts are not corrosive and, coated onto a support, they can be easily reused. Examples of solid acid catalysts used in esterification reactions include ion-exchange resins, zeolites and superacids like sulphated zirconia and niobium acid. Ion-exchange resins are the most common heterogeneous catalysts used and have proven to be effective in liquid phase esterification and etherification reactions. Because of their selective adsorption of reactants and swelling nature, these resins not only catalyse the esterification reaction but also affect the equilibrium conversion. Shortcomings include insufficient thermal resistance, which limits the reaction temperature to 120^(@)C , preventing widespread use in industry. Zeolites, like Y, X, BEA, ZSM-5 and MCM 41 offer an interesting alternative and have proven to be efficient catalysts for esterification reactions. Zeolites have found wide application in oil refining, petrochemistry and in the production of fine chemicals. Their success is based on the possibility to prepare zeolites with strong Brønsted acidity that can be controlled within a certain range, combined with a good resistance to high reaction temperatures. In this study, the activity of various commercial available solid acid catalysts is assessed with respect to the esterification of acetic acid with butanol. The ion-exchange resins Amberlyst 15 and Smopex-101, the acid zeolites H-ZSM-5, H-MOR, H-BETA and H-USY, and the solid superacids sulphated zirconia and niobium acid are selected. Comparative esterification experiments have been carried out using the homogeneous catalysts sulphuric acid, p toluenesulphuric acid and a heteropolyacid (HPA). The weight-based activity of the heterogeneous catalysts tested is maximum for Smopex 101. The following table gives the activity of different catalysts in the esterification reaction between acetic acid and butanol at 75^(@)C . Here: k_(obs) : observed reaction rate constant ( m^(3) mol^(-1)s^(-1) ) kc catalysed reaction rate constant ( m^(3)mol^(-1) g_("cat")^(-1)s^(-1) ) Please note: k c = k obs/ amount (in g) (source: PETERS, T., BENES, N., HOLMEN, A., & KEURENTJES, J. (2006). Comparison of commercial solid acid catalysts for the esterification of acetic acid with butanol. Applied Catalysis A: General, 297(2), 182-188. doi:10.1016/j.apcata.2005.09.00) Unit for observed rate constant for esterification reaction is m³ mol^-1s^-1 , so the reaction is:
Read the passage given below and answer the question: Industrially widely applied esterification reactions are commonly catalysed using mineral liquid acids, such as sulphuric acid and p-toluenesulphonic acid. The catalytic activity of homogeneous catalysts is high. They suffer, however, from several drawbacks, such as their corrosive nature, the existence of side reactions, and the fact that the catalyst cannot be easily separated from the reaction mixture. The use of solid acid catalysts offers an alternative and has received a lot of attention in the past years. Solid acid catalysts are not corrosive and, coated onto a support, they can be easily reused. Examples of solid acid catalysts used in esterification reactions include ion-exchange resins, zeolites and superacids like sulphated zirconia and niobium acid. Ion-exchange resins are the most common heterogeneous catalysts used and have proven to be effective in liquid phase esterification and etherification reactions. Because of their selective adsorption of reactants and swelling nature, these resins not only catalyse the esterification reaction but also affect the equilibrium conversion. Shortcomings include insufficient thermal resistance, which limits the reaction temperature to 120^(@)C , preventing widespread use in industry. Zeolites, like Y, X, BEA, ZSM-5 and MCM 41 offer an interesting alternative and have proven to be efficient catalysts for esterification reactions. Zeolites have found wide application in oil refining, petrochemistry and in the production of fine chemicals. Their success is based on the possibility to prepare zeolites with strong Brønsted acidity that can be controlled within a certain range, combined with a good resistance to high reaction temperatures. In this study, the activity of various commercial available solid acid catalysts is assessed with respect to the esterification of acetic acid with butanol. The ion-exchange resins Amberlyst 15 and Smopex-101, the acid zeolites H-ZSM-5, H-MOR, H-BETA and H-USY, and the solid superacids sulphated zirconia and niobium acid are selected. Comparative esterification experiments have been carried out using the homogeneous catalysts sulphuric acid, p toluenesulphuric acid and a heteropolyacid (HPA). The weight-based activity of the heterogeneous catalysts tested is maximum for Smopex 101. The following table gives the activity of different catalysts in the esterification reaction between acetic acid and butanol at 75^(@)C . Here: k_(obs) : observed reaction rate constant ( m^(3) mol^(-1)s^(-1) ) kc catalysed reaction rate constant ( m^(3)mol^(-1) g_(cat)^(-1)s^(-1) ) Please note: k c = k obs/ amount (in g) (source: PETERS, T., BENES, N., HOLMEN, A., & KEURENTJES, J. (2006). Comparison of commercial solid acid catalysts for the esterification of acetic acid with butanol. Applied Catalysis A: General, 297(2), 182-188. doi:10.1016/j.apcata.2005.09.00) Which of the following are heterogeneous catalysts for esterifctaion reaction:
A disc of radius r = 0.1 m is rolled from a point A on a track as shown in the figure. The part AB of the track is a semi-circle of radius R in a vertical plane. The disc rolls without sliding and leaves contact with the track at its highest point B. Flying through the air it strikes the ground at point C. The velocity of the center of mass of the disc makes an angle of 30^(@) below the horizontal at the time of striking the ground. At the same instant, velocity of the topmost point P of the disc is found to be 6 m//s (Take g = 10 m//s^(2) ). (a) Find the value of R. (b) Find the velocity of the center of mass of the disc when it strikes the ground. (c) Find distance AC.
NCERT FINGERTIPS-SEXUAL REPRODUCTION IN FLOWERING PLANTS-Sexual Reproduction In Flowering Plants
- An embryo may sometimes develop from any cell of embryo sac other than...
Text Solution
|
- In angiosperms, female gametophte is called as embryo sac. Given figur...
Text Solution
|
- Pollen grains that would easily germinate on stigma are found to germi...
Text Solution
|
- In cereals, one or few outermost layers of the endosperm become highly...
Text Solution
|
- Consider the following statements. (i) Polyspermy may bring about fe...
Text Solution
|
- Given figures show the pollen-stigma interaction, where pollen wall pr...
Text Solution
|
- Among the terms listed below, those that are not technically correct n...
Text Solution
|
- Embryo sac is to ovule asis to an anther.
Text Solution
|
- In a typical complete, bisexual and hypogynous flower the arrangement ...
Text Solution
|
- A dicotyledonous plant bears flowers but never produces fruits and see...
Text Solution
|
- The outermost and innnermost wall layers of microsporangium in an anth...
Text Solution
|
- During microsporogenesis, meiosis occurs in
Text Solution
|
- From among the sets of terms given below, identify those that are asso...
Text Solution
|
- Starting from the innermost part, the correct sequence of parts in an ...
Text Solution
|
- From the statements given below, choose the option that are true for a...
Text Solution
|
- Autogamy can occur in a chasmogamous flower if
Text Solution
|
- Choose the correct statement from the following.
Text Solution
|
- A particular species of plant produces light, non-sticky pollen in lar...
Text Solution
|
- From among the situations given below, choose the one that prevents bo...
Text Solution
|
- In a fertilised embryo sac, the haploid, diploid and triploid structur...
Text Solution
|