A 10V battery is connected to two capaci...

A 10V battery is connected to two capacitors `C_1` and `C_2` and a resistor R. When the capacitors are fully charged, then the potential difference across the resistor will be

10 V

3.33 V

zero

Text Solution

Verified by Experts

The correct Answer is:

at steady state.
`V_(R)=iR=0xx2=0`

Topper's Solved these Questions

CALORIMETRY AND THERMAL EXPANSION
RESONANCE|Exercise Advanced Level Problems|13 Videos
CENTRE OF MASS
RESONANCE|Exercise Exercise|44 Videos

Similar Questions

Explore conceptually related problems

A capacitor of capacitance C is charged to a potential difference V_(0) . The charged battery is disconnected and the capacitor is connected to a capacitor of unknown capacitance C_(x) . The potential difference across the combination is V. The value of C_(x) should be

A capacitor of capacitance 10 mu F is charged to a potential 50 V with a battery. The battery is now disconnected and an additional charge 200 mu C is given to the positive plate of the capacitor. The potential difference across the capacitor will be.

A d.c. battery of V volt is connected to a series combination of a resistor R and an ideal diode D as shown in the figure below. The potential difference across R will be

A capacitor of capacitance 4 muF is fully charged to a potential difference of 12 V and then charging battery is disconnected. Charged capacitor is now connected across an inductor of self-inductance of 1.2 mH. The current in the circuit at a time when the potential difference across the capacitor is 6 V is

An ideal capacitor of capacitance 0.2muF is charged to a potential difference of 10V . The charging battery is than disconnected. The capacitor is then connected to an ideal inductor of self inductance 0.5mH . The current at a time when the potential difference across the capacitor is 5V is :

A muF capacitor C_1 is charged to V_0 = 120 V . The charging battery is then removed and the capacitor is connected in parallel to an uncharged + 4muF capacitor C_2 . (a) what is the potential difference V across the combination? (b) what is the stored energy before and after the switch S is closed?

An inductor, a capacitor and a resistor are connected in series to an a.c. supply. When measured with an a.c. voltmeter, the potential difference across the inductor, capacitor and resistor are respectively 90 volt, 60 volt and 40 volt. Then the supply voltage is

RESONANCE-CAPACITOR-Exercise

What fraction of the energy drawn from the charging battery is stored ...
Text Solution
|
How do adjust three capacitors to get high energy on same potential
Text Solution
|
A 10V battery is connected to two capacitors C1 and C2 and a resistor ...
Text Solution
|
In the diagram shown find the potential difference between the points ...
Text Solution
|
Two capacitors A and B are connected in series with a battery as shown...
Text Solution
|
Two capacitors of 2mu F and 3mu F are connected in series. The potenti...
Text Solution
|
The capcity of a parallel plate condenser is 10 muF, when the distance...
Text Solution
|
Four metallic plates arearrranged as shown in the figure. If the dista...
Text Solution
|
For the circuit shown in figure, the equivalent capacitance of the com...
Text Solution
|
Three capacitors are connected as shwn in. Then, the charge on capacit...
Text Solution
|
In the combination shown in the figure, the ideal voltmeter reading wi...
Text Solution
|
If a thin metal foil of same area is placed between the two plates of ...
Text Solution
|
The equivalent capacitance of the circuit shown, between points A and ...
Text Solution
|
In the figure shown, the effective capacitance between the points A an...
Text Solution
|
In the circuit shown in figure, each capacitor has a capacity of 3 muF...
Text Solution
|
The equivalent capacitance in the circuit shown in figure will be
Text Solution
|
What is the effective capacitance between A and B in the following fig...
Text Solution
|
A capacitor is conneted to a cell emf E having some internal resistanc...
Text Solution
|
For the circuit shown in the diagram find the value of Va - Vb after l...
Text Solution
|
A 4mu F capacitor is charged to 400 volts and then its plates are join...
Text Solution
|