A 100 MHz xarrier wave frequency is modu...

A 100 MHz xarrier wave frequency is modulated by 10 kHz sinusoidal modulating signal. If the maximum frequency deviation is 50 kHz, find the modulation index.

Text Solution

Verified by Experts

`m_(f)=(Deltaf)/(f_(m))=(50 kHz)/(10kHz)=5`

Topper's Solved these Questions

WAVES AND OSCILLATIONS
ALLEN|Exercise Part-1(Exercise-01)|53 Videos
WAVES AND OSCILLATIONS
ALLEN|Exercise Part-1(Exercise-02)|19 Videos
WAVES AND OSCILLATIONS
ALLEN|Exercise Part-2(Example)|15 Videos
SEMICONDUCTORS
ALLEN|Exercise Part-3(Exercise-4)|51 Videos

Similar Questions

Explore conceptually related problems

In frequency modulated wave

A 107.6 MHz carrier signal is frequency modulated by a 7kHz sine wave . The resultant FM signal has a frequency deviation of 50 kHz. Determine the modulation index and the carrier swing of the FM wave

In an FM system a 7 kHz signal modulates 108 MHz carrier so that frequency deviation is 50 kHz . The frequency modulation index is

In an FM system a 9 kHz signal modulates 108 MHz carrier so that frequency deviation is 60 kHz . The frequency modulation index is

In frequency modulation, the amount of frequency deviation depends on the

A sinusoidal carrier wave of amplitude 40 V is amplitude modulated by a sinusoidal signal voltage. What is the amplitude of each side band if the modulation index is 25%.

In an FM system a 7kHz signal modulates 108 MHz carrier so that frequency deviation is 50 kHz . The carrier swing is

A 100 V carrier wave is mode to vary betqeen 160 and 40 V by a modulating signal . What is the modulation index ?

A sinusoidal carrier wave of frequencu 1 MHz and amplitude 100 V is amplitude modulated by sinusoidal voltage of frequency 4 kHz producting 50% modulation. The frequencies of lower and upper side band terms are respectively,

A sinusoidal carrier voltage of 80 "volts" amplitude and 1MHz frequency is amplitude modulated by a sinusoidal voltage of frequency 5 kHz producing 50% modulation. Calculate the amplitude and frequency of lower and upper side bands.

ALLEN-WAVES AND OSCILLATIONS-Part-3(Example)

Differentiate zener and avalance breakdown.
Text Solution
|
A sinusoidal voltage of amplitude 25 volts and frequency 50 Hz is appl...
Text Solution
|
The halfwave rectifier supplies power to be 1 k Omega. The input suppl...
Text Solution
|
A fullwave rectifier supplies a load of 1 k Omega. The a.c voltage app...
Text Solution
|
A fullwave P.N diode rectifier used load resistor of 1500 Omega. No fi...
Text Solution
|
A zener diode of voltage V(Z)(=6 volt) is used to maintain a constant ...
Text Solution
|
A Zener diode is specified having a breakdown voltage of 9.1 V with a ...
Text Solution
|
In a transistor, the value of beta is 50. Calculate the value of alpha
Text Solution
|
Calculate the collector and emitter current for which I(b) = 20 mA, be...
Text Solution
|
For a common emitter amplifier, current gain = 50. If the emitter curr...
Text Solution
|
Transistor with beta = 75 is connected to common-base configuration. W...
Text Solution
|
The base current is 100 muA and collector current is 3 mA (a) Calcul...
Text Solution
|
In npn transistor circuit, the collector current us 10 mA. If 95 % of ...
Text Solution
|
In an NPN transistor 10^(10) electrons enter the emitter in 10^(-6)s a...
Text Solution
|
TV transmission tower at Kota has a height of 80 m. Radius of earth is...
Text Solution
|
A ground reciver is receiving a signal at (a) 5 MHz, and (b) 100 MHz, ...
Text Solution
|
A separate high freq. wave (i.e. carrier wave) is needed in modulation...
Text Solution
|
A message signal of frequency 10kHz and peak voltage of 10"volts" is u...
Text Solution
|
The modulation index of an FM carrier having a carrier swing of 200kHz...
Text Solution
|
A 100 MHz xarrier wave frequency is modulated by 10 kHz sinusoidal mod...
Text Solution
|