An alternating current source of frequen...

An alternating current source of frequency `100 Hz` is joined to a combination of a resistance, a capacitance and a coil in series. The potential difference across the coil, the resistance and the capacitor is `46, 8 and 40` volt respectively. The electromotive force of alternating current source in volt is

Text Solution

Verified by Experts

Topper's Solved these Questions

ATOMS
DISHA|Exercise PHYSICS|1 Videos

Similar Questions

Explore conceptually related problems

Volt is the SI unit of (potential difference, current, resistance, charge)

A coil of inductance 0.1 H is connected to 50 V, 100Hz generator and current is found to be 0.5A . The potential difference across resistance of coil is:

In LCR series circuit an ac emf of 2 volt and frequency 50 Hz is applied across the combination. If resistance is 4Omega , capacitance is 8muF and inductance is 10^(-2)H then the voltage across inductor will be

When an AC signal of frequency 1 kHz is applied across a coil of resistance 100 Omega , then the applied voltage leads the current by 45^@ . The inductance of the coil is

An a.c source of frequency 1000 Hz is connected to a coil of (200)/(pi) mH and negligible resistance. If effective current through the coil is 7.5 mA , what is the voltage (in volt) across the coil ?

Three capacitors 3 muF, 6 muF and 6 muF are connected in series to source of 120 V. The potential difference in volt, across the 3 muF capacitor will be

An AC source is connected with a resistance ( R) and an unchanged capacitance C, in series. The potential difference across the resistor is in phase with the initial potential difference across the capacitor for the first time at the instant (assume that at t =0 , emf is zero)

In L-R circuit, the a.c. source has voltage 220 volt. If the potential difference across the inductance is 176 volt, the p.d. across the resistance will be

DISHA-ALTERNATING CURRENT-Physics

in a LCR circuit capacitance is chagned from C to 2C. For the resomat ...
Text Solution
|
The power factor of LCR circuit at resonance is-
Text Solution
|
An alternating current source of frequency 100 Hz is joined to a combi...
Text Solution
|
A 10 ohm resistance, 5 mH coil and 10mu F capacitor are joined in seri...
Text Solution
|
The phase difference between the current and voltage of LCR circuit in...
Text Solution
|
The coefficient of induction of a choke coil is 0.1 H and resistance i...
Text Solution
|
The resonant frequency of a circuit is f. If the capacitance is made 4...
Text Solution
|
In the non-resonant circuit, what will be the nature of the circuit fo...
Text Solution
|
In a series LCR circuit, resistance R=10Omega and the impedence Z=20Om...
Text Solution
|
An alternating EMF of frequency (1)/(2pi sqrt(LC)) is applied to a ser...
Text Solution
|
In a circuit L, C and R are connected in series with an alternating vo...
Text Solution
|
For the series LCR circuit shown in the figure, what is the resonance ...
Text Solution
|
In an AC circuit, V and I are given by V=100sin(100t)volts, I=100sin(1...
Text Solution
|
For a series RLC circuit R=X(L)=2X(C). The impedence of the current an...
Text Solution
|
In an AC circuit the voltage applied is E = E(0) sin omega t. The resu...
Text Solution
|
An AC supply gives 30 V(rms)which passes through a 10 Omega resistance...
Text Solution
|
The figure shows variation of R,X(L) and X(C) with frequency f in a se...
Text Solution
|
An alternating e.m.f. of angular frequency omega is applied across an ...
Text Solution
|
In the circuit shown in figure neglecting source resistance the voltme...
Text Solution
|
In an LCR circuit, the sharpness of resonance depends on
Text Solution
|