Home
Class 12
PHYSICS
In a circuit, the value of the alternati...

In a circuit, the value of the alternating current is measured by hot wire ammeter as `10` ammeter. Its peak value will be

A

`10 A`

B

`20 A`

C

`14.14`A

D

`7.07 A`

Text Solution

Verified by Experts

Promotional Banner

Topper's Solved these Questions

Similar Questions

Explore conceptually related problems

Alternating current can not be measured by D.C. Ammeter because

The peak value of an alternating current is 10. A. Find its rms value

A DC ammeter cannot measure alternating current because

Find the current measured by the ammeter in the circuit shown in figure

State the rms value of an alternating current? Write the relation between the rms value and peak value of an alternating current that varies with time

If reading of an ammeter is 10 A, the peak value of current is

In ac circuit when ac ammeter is connected it reads i current if a student used dc ammeter in place of ac ammeter the reading in the dc ammeter will be:

In the circuit shown in figure, the current is to measured. What is the value of the current if the ammeter shown (i) is a galvanometer with a resistance R_G=60*00Omega . (ii) is a galvanometer described in (i) but converted to an ammeter by a shunt resistance r_s=0*02Omega , (iii) is an ideal ammeter with zero resistance?

DISHA-ALTERNATING CURRENT-Physics
  1. The peak value of an alternating emf E given by E=(E0) cos omega t ...

    Text Solution

    |

  2. An ac is given by equation I=(I1) cos omega t + (I2) sin omega t. The ...

    Text Solution

    |

  3. In a circuit, the value of the alternating current is measured by hot ...

    Text Solution

    |

  4. The frequency of an alternating voltage is 50 cycles/sec and its ampli...

    Text Solution

    |

  5. A resistance of 20 Omega is connected to a source of an alternating po...

    Text Solution

    |

  6. An alternating current of frequency 'f' is flowing in a circuit contai...

    Text Solution

    |

  7. An alternating voltage is connected in series with a resistance R and ...

    Text Solution

    |

  8. An inductive circuit a resistance of 10ohm and an inductance of 2.0 h...

    Text Solution

    |

  9. A 20volts AC is applied to a circuit consisting of a resistance and a...

    Text Solution

    |

  10. An alternating voltage E=200sqrt(2)sin(100t) is connected to a 1 micro...

    Text Solution

    |

  11. A resistor and a capacitor are connected in series with an a.c. source...

    Text Solution

    |

  12. A 120 volt AC source is connected across a pure inductor of inductance...

    Text Solution

    |

  13. The instantaneous value of current in an A.C. circuit is I=2 sin (100 ...

    Text Solution

    |

  14. In a L-R circuit, the value of L is (0.4/(pi)) henry and the value of ...

    Text Solution

    |

  15. The figure represents the voltage applied across a pure inductor. The ...

    Text Solution

    |

  16. One 10V, 60W bulb is to be connected to 100V line. The required induct...

    Text Solution

    |

  17. A resistance of 300Omega and an inductance of 1/(pi) henry are connect...

    Text Solution

    |

  18. If an alternating voltage is represented as E = 141 sin (628t), then ...

    Text Solution

    |

  19. The r.m.s. value of an ac of 50 Hz is 10 A. (1) The time taken by the ...

    Text Solution

    |

  20. If the voltage in an ac circuit is reparesented by the equation V=220 ...

    Text Solution

    |