Home
Class 12
PHYSICS
One 10V, 60W bulb is to be connected to ...

One `10V, 60W` bulb is to be connected to `100V` line. The required inductance coil has self-inductance of value `(f=50Hz)`

A

` 0.052 H`

B

`2.42 H`

C

`16.2 mH`

D

`1.62 mH`

Text Solution

Verified by Experts

Promotional Banner

Topper's Solved these Questions

Similar Questions

Explore conceptually related problems

A 60 W , 120 V bulb is connected to a 240 V , 60 Hz supply with an inductance in series. Find the value of inductance so that bulb gets correct voltage.

A 60 volt-10 watt bulb is operated at 100 volt-60 Hz ac. The inductance required is

A 60 volt-10 watt bulb is operated at 100 volt-60 Hz ac. The inductance required is

An ekectric bulb of 100 W - 300 V is connected with an AC supply of 500 V and (150)/(pi) Hz. The required inductance to save the electric bulb is

A bulb is connected to a 100 V DC supply . It is found that the current of 5 A flows in the circuit. The same bulb is connected to an AC supply at 120 V . The frequency of source is 50 Hz. Calculate the inductance of coil required so that the lamp glows in an AC circuit too.

An electric bulb is designed to consume 55 W when operated at 110 volts. It is connected to a 220 V, 50 Hz line through a choke coil in series. What should be the inductance of the coil for which the bulb gets correct voltage?

If a current of 10 A flows in one second through a coil and the induced e.m.f. is 10V , then the self-inductance of the coil is

A 100W bulb is connected to an AC source of 220V , 50Hz . Then the current flowing through the bulb is

A coil of negligible resistance is connected inseries with 90 Omega resistor acorss a 120 V -60 Hz line. A voltmeter reads 36 V across the resistance. Find voltage across the coil and inductance of the coil.

DISHA-ALTERNATING CURRENT-Physics
  1. An alternating current of frequency 'f' is flowing in a circuit contai...

    Text Solution

    |

  2. An alternating voltage is connected in series with a resistance R and ...

    Text Solution

    |

  3. An inductive circuit a resistance of 10ohm and an inductance of 2.0 h...

    Text Solution

    |

  4. A 20volts AC is applied to a circuit consisting of a resistance and a...

    Text Solution

    |

  5. An alternating voltage E=200sqrt(2)sin(100t) is connected to a 1 micro...

    Text Solution

    |

  6. A resistor and a capacitor are connected in series with an a.c. source...

    Text Solution

    |

  7. A 120 volt AC source is connected across a pure inductor of inductance...

    Text Solution

    |

  8. The instantaneous value of current in an A.C. circuit is I=2 sin (100 ...

    Text Solution

    |

  9. In a L-R circuit, the value of L is (0.4/(pi)) henry and the value of ...

    Text Solution

    |

  10. The figure represents the voltage applied across a pure inductor. The ...

    Text Solution

    |

  11. One 10V, 60W bulb is to be connected to 100V line. The required induct...

    Text Solution

    |

  12. A resistance of 300Omega and an inductance of 1/(pi) henry are connect...

    Text Solution

    |

  13. If an alternating voltage is represented as E = 141 sin (628t), then ...

    Text Solution

    |

  14. The r.m.s. value of an ac of 50 Hz is 10 A. (1) The time taken by the ...

    Text Solution

    |

  15. If the voltage in an ac circuit is reparesented by the equation V=220 ...

    Text Solution

    |

  16. If the voltage in an ac circuit is reparesented by the equation V=220 ...

    Text Solution

    |

  17. If the voltage in an ac circuit is represented by the equation. V = ...

    Text Solution

    |

  18. Assertion: The alternating current lags behined the e.m.f. by a phase ...

    Text Solution

    |

  19. Statement 1: An alternating current shown magnetic effect. Statemen...

    Text Solution

    |

  20. Assertion: A capacitor of suitable capacitance can be used in an AC ci...

    Text Solution

    |