Home
Class 12
PHYSICS
A resistance of 300Omega and an inductan...

A resistance of `300Omega` and an inductance of `1/(pi)` henry are connected in series to an `AC` voltage of `20 "volts"` and `200Hz` frequency. The phase angle between the voltage and current is

A

`tan^(-1) .(4)/(3)`

B

`tan^(-1) .(3)/(4)`

C

`tan^(-1) .(3)/(2)`

D

`tan^(-1) .(2)/(5)`

Text Solution

Verified by Experts

Promotional Banner

Topper's Solved these Questions

Similar Questions

Explore conceptually related problems

In series LCR circuit, the phase angle between supply voltage and current is

A resistance of 10Omega , an inductance of ((2)/(pi)) henry and a capacitor of ((1)/(pi)) mu F are connected in series with mains line of 110V and 50Hz . The phase difference between the voltage and current will be

A coil of resistance 300 Omega and inductance 1.0 henry is connected across an voltages source of frequency 300//2pi Hz . The phase difference between the voltage and current in the circuit is

A coil of resistance 200 ohms and self inductance 1.0 henry has been connected in series to an a.c. source of frequency 200/pi Hz . The phase difference between voltage and current is

A resistance of 50Omega , an inductance of 20//pi henry and a capacitor of 5//pimuF are connected in series with an A.C. source of 230 volt and 50Hz. The impedance of circuit is –

A coil of resistance 500 Omega and inductance 1.4 H is connected to an alternating voltage supply of frequency 100 //pi Hz. What is the phase difference between the voltage and current in the circuit ?

A 12 ohm resistor and a 0.21 henry inductor are connected in series to an AC source operating at 20volts, 50 cycle/second. The phase angle between the current and the source voltage is

DISHA-ALTERNATING CURRENT-Physics
  1. An alternating current of frequency 'f' is flowing in a circuit contai...

    Text Solution

    |

  2. An alternating voltage is connected in series with a resistance R and ...

    Text Solution

    |

  3. An inductive circuit a resistance of 10ohm and an inductance of 2.0 h...

    Text Solution

    |

  4. A 20volts AC is applied to a circuit consisting of a resistance and a...

    Text Solution

    |

  5. An alternating voltage E=200sqrt(2)sin(100t) is connected to a 1 micro...

    Text Solution

    |

  6. A resistor and a capacitor are connected in series with an a.c. source...

    Text Solution

    |

  7. A 120 volt AC source is connected across a pure inductor of inductance...

    Text Solution

    |

  8. The instantaneous value of current in an A.C. circuit is I=2 sin (100 ...

    Text Solution

    |

  9. In a L-R circuit, the value of L is (0.4/(pi)) henry and the value of ...

    Text Solution

    |

  10. The figure represents the voltage applied across a pure inductor. The ...

    Text Solution

    |

  11. One 10V, 60W bulb is to be connected to 100V line. The required induct...

    Text Solution

    |

  12. A resistance of 300Omega and an inductance of 1/(pi) henry are connect...

    Text Solution

    |

  13. If an alternating voltage is represented as E = 141 sin (628t), then ...

    Text Solution

    |

  14. The r.m.s. value of an ac of 50 Hz is 10 A. (1) The time taken by the ...

    Text Solution

    |

  15. If the voltage in an ac circuit is reparesented by the equation V=220 ...

    Text Solution

    |

  16. If the voltage in an ac circuit is reparesented by the equation V=220 ...

    Text Solution

    |

  17. If the voltage in an ac circuit is represented by the equation. V = ...

    Text Solution

    |

  18. Assertion: The alternating current lags behined the e.m.f. by a phase ...

    Text Solution

    |

  19. Statement 1: An alternating current shown magnetic effect. Statemen...

    Text Solution

    |

  20. Assertion: A capacitor of suitable capacitance can be used in an AC ci...

    Text Solution

    |