Home
Class 11
PHYSICS
(i) One end of a uniform glass capillary...

(i) One end of a uniform glass capillary tube of radius `r = 0.025` cm is immersed vertically in water to a depth `h = 1cm`. Contact angle is `0^(@)`, surface tension of water is `7.5 × 10–2 N//m`, density of water is `rho = 10^(3) kg//m^(3)` and atmospheric pressure is `P_(o) = 10^(5) N // m^(2)`

Find the excess pressure to be applied on the water in the capillary tube so that -
(a) The water level in the tube becomes same as that in the vessel.
(b) Is it possible to blow out an air bubble out of the tube by increasing the pressure? (ii) A container contains two immiscible liquids of density `rho_(1)` and `rho_(2) (rho_(2) gt rho_(1))`. A capillary of radius r is inserted in the liquid so that its bottom reaches up to denser liquid and lighter liquid does not enter into the capillary. Denser liquid rises in capillary and attain height equal to h which is also equal to column length of lighter liquid. Assuming zero contact angle find surface tension of the heavier liquid.

Promotional Banner

Similar Questions

Explore conceptually related problems

One end of uniform glass capillary tube of radius r = 0.05 cm is immersed vertically in water to a depth h = 2 cm . The excess pressure in N//m^(2) required to blow an air bubble out the tube ( surface tension pof water = 7 xx 10^(-2) N//m , density of water = 10^(3) kg/m^(3) and g = 10m//s^(2) ).

One end of a uniform glass capillary tube of radius r = 0.025 cm is immersed vertically in water to a depth h = 1 cm. The excess pressure in N/ m^2 required to blow an air bubble out of the tube is : [Surface tension of water = 7 xx 10^(-2) Nm, Density of water = 10^3 kg m^(-3) , Acceleration due to gravity = 10ms^(-2) ]

One end ofauniform glass capillary tube of radius r = 0.025 cm is immersed vertically in water to a depth h= 1 cm. The excess pressure in Nm required to blow an air bubble out of the tube (Surface tension of water = 7xx10^-2 N m^-1 Density of water 10^-3 kg m^-3 Acceleration due to gravity = 10 ms^-2 )

One end of a uniform glass capillary tube of radius r = 0.025 cm is immersed vertically in water to a depth h = 1cm. The excess pressure (in Nm^(-2) ) required to blow an air bubble out of the tube (Given , surface tension of water = 7 xx 10^(-2) Nm^(-1) , density of water = 10^(-3) k gm^(-3) and acceleration due to gravity = 10 ms^(-2) )

A glass capillary tube of inner diameter 0.28 mm is lowered vertically into water in a vessel. The pressure to be applied on the water in the capillary tube so that water level in the tube is same as that in the vessel (in Nm^-2 ) is Surface tension of water = 0.07 Nm^-1 Atmospheric pressure = 10^5 Nm^-2

A capillary tube of radius 0.25 mm is submerged vertically in water so that 25 mm of its length is outside water. The radius of curvature of the meniscus will be (surface tension of water =75xx10^(-3) N/m)

A capillary tube of radius 0.25 mm is submerged vertically in water so that 25 mm of its length is outside water. The radius of curvature of the meniscus will be (surface tension of water =75xx10^(-3) N/m)