Home
Class 12
PHYSICS
A moving coil galvanometer is converted ...

A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` across it and ammeter reads up `0.06 A`, when a shunt of resistance `r` is used. What is the maximum current which can be sent through this galvanometer if no shunt is used ?

A

0.01 A

B

0.02 A

C

0.03 A

D

0.04 A

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

A moving coil galvnometer is converted into an ammeter reading up to 0.03 A by connecting a shunt of resistance r/4 . What is the maximum current which can be sent through this galvanometer if no shunt is used (here r=resistance of galvanometer)

A galvanometer of resistance R_(G) is to be converted into an ammeter, with the help of a shunt of resistance R. If the ratio of the heat dissipated through galvanometer and shunt is 3:4, then

If the galvanometer current is 10 mA, resistance of the galvanometer is 40 Omega and shunt of 2 Omega is connected to the galvanometer, the maximum current which can be measured by this ammeter is

Statement I : If galvanometer is converted into an ammeter and milliammeter then the shunt resistance of ammeter is lower than that of milliammeter. Statement II : The shunt resistance must allow more current to pass through in case of ammeter than that of milliammeter

A voltmeter reading upto 10 V has a resistance of 1000 Omega . It can be converted into an ammeter reading up ot 10 A by connecting a shunt of

The shunt required for 10% of main current to be sent through the moving coil galvanometer of resistance 99 Omega will be-

A galvanometer of resistance 90 Omega is shunted by a resistance of 10 Omega . What fraction of main current passes through the shunt ?

A galvanometer of resistance 50Omega is converted into an ammeter by connecting a low resistance (shunt) of value 1Omega in parallel to the galvanometer, S. If full - scale deflection current of the galvanometer is 10 mA, then the maximum current that can be measured by the ammeter is -