Home
Class 12
PHYSICS
A triode valve of anode slope resistance...

A triode valve of anode slope resistance `20 kOmega` is used with an anode load resistance of `50 kOmega`. If an alternating signal of 0.5 V (rms value) is applied to the grid, find the output if the amplification factor of the valve is 15.

Text Solution

Verified by Experts

The correct Answer is:
5.36 V
Promotional Banner

Topper's Solved these Questions

Similar Questions

Explore conceptually related problems

A triode value has amplification factor 21 and dynamic plate resistance 10 kOmega . This is used as an amplifier with a load of 20 kOmega) . Find the gain factor of the amplifier.

A transistor, connected in common emitter configuration, has input resistance R_(i)=2kOmega and load resistance 6kOmega . If beta=60 and an input signal 10mV is applied, calculate the (i) resistance gain, (ii) voltage gain (iii) the power gain and (iv) the value of the output signal.

In half wave rectifier a p-n diode with internal resistance 20Omega is used. If the load resistance of 2kOmega is used in the circuit, then find the efficiency of this half wave rectifier.

If in a triode valve amplification factor is 20 and plate resistance is 10 kOmega , then its mutual conductance is

A triode has mutual conductance = 2.0 millimho and plate resistance = 20 kOmega . It is desired to amplify a signal by a factor of 30. What load resistance should be added in the circuit?

A triode has a plate resistance of 10 k Omega and amplification factor 24. If the input signal voltage is 0.4 V (r.m.s.), and the load resistance is 10 k ohm , then, the output voltage (r.m.s.) is

The output resistance of an n-p-n transistor is 4 komega and input resistance is 1k omega if the current gain is 50 and output voltage is 4V then find the input voltage

The voltage of a triode amplifier with a resistive load of 5 kOmega is 10 while with a resistive load of 12 kOmega . It is 15. Calculate the amplification factor and plate resistance of the triode.

NN GHOSH-DIODE, TRIODE & TRANSISTER-Exercises
  1. A diode has Child's constant K =0.2 (current in mA and voltage in volt...

    Text Solution

    |

  2. In a certain triode, the output is 5 mA with an anode potential of 200...

    Text Solution

    |

  3. A triode valve of anode slope resistance 20 kOmega is used with an ano...

    Text Solution

    |

  4. The voltage of a triode amplifier with a resistive load of 5 kOmega is...

    Text Solution

    |

  5. The plate resistance of a triode is 7.7 kOmega, and the transconductan...

    Text Solution

    |

  6. Determine the conductivity of pure germanium at 27^(@)C. The concentra...

    Text Solution

    |

  7. In a p-n junction diode the reverse saturation current is 10 muA. What...

    Text Solution

    |

  8. Assume that the silicon diode in the given circuit requires a minimum ...

    Text Solution

    |

  9. The base current of a transistor is 105 muA and the collector current ...

    Text Solution

    |

  10. In a silicon transistor, a change of 7.89 mA in the emitter current p...

    Text Solution

    |

  11. In a silicon transistor the base current is changed by 20 mu A. This r...

    Text Solution

    |

  12. In triode valve, for a grid voltage V(g) = -1.2 V, the plate current I...

    Text Solution

    |

  13. In the accompanying circuit (Fig. 5.9) the value of beta is 100. Find ...

    Text Solution

    |

  14. In the accompanying circuit Fig. 5.10, if it is assumed that when that...

    Text Solution

    |

  15. In the given circuit Fig. 5.11, the base current is 10 muA and the col...

    Text Solution

    |

  16. In the given circuit (Fig. 5.12) calculate the value of the collector ...

    Text Solution

    |

  17. Calculate the emiter current and collector voltage of the circuit give...

    Text Solution

    |

  18. A transistor connected in common emitter configuration has V(C C)=8V, ...

    Text Solution

    |

  19. In a transistor collector load is 4 kOmega whereas the zero signal cur...

    Text Solution

    |