Home
Class 11
PHYSICS
A side wall of a wide open tank is provi...

A side wall of a wide open tank is provided with a narrowing tube through which water flows out. The cross-sectional area of the tube decreases from `S=3.0 cm^(2)` to `s=1.0 cm^(2)`. The water level in the tank is `h=4.6 m` heigher than in the tube. Neglecting the viscosity of water, find the horizontal component of the force tending to pull the tube out of the tank.

Text Solution

Verified by Experts

The correct Answer is:
[6 N]
Promotional Banner

Topper's Solved these Questions

  • FLUID MECHANICS

    PHYSICS GALAXY - ASHISH ARORA|Exercise Advanced MCQ with one or more options correct|18 Videos

  • GRAVITATION

    PHYSICS GALAXY - ASHISH ARORA|Exercise Unsolved Numerical|94 Videos

Similar Questions

Explore conceptually related problems

The water level on a tank is 5m high. There is a hole of 1 cm^(2) cross-section at the bottom of the tank. Find the initial rate with which water will leak through the hole. ( g= 10ms^(-2) )

Shows a large closed cylindrical tank containing water, Initially the air trapped above the water surface has a height h_(0) and pressure 2p_(0) where p_(0_ is the atmospheric pressure. There is a hole in the wall of tank at a depth h_(1) below the top from which water comes out. A long vertical tube is connected as shown. (a) Find the height h_(2) of the water in the long tube above the top initially. (b) Find the speed with which water comes out of hole.(c)Find the height of the water in the long tube above the top when the water stops coming out of the hole.

The level of water in a tank is 5 m high . A hole of the area 10 cm^2 is made in the bottom of the tank . The rate of leakage of water from the hole is

Water flows through the tubes shown in figure. The areas of cross-section of the wide and the narrow portions of the tube are 5 cm^(2) and 2 cm^(2) respectively. The rate of flow of water through the tube is 500 cm^(3)//s . Find the difference of mercury levels in the U-tube.

Water (density rho ) is flowing through the uniform tube of cross-sectional area A with a constant speed v as shown in the figure. Find the magnitude of force exerted by the water on the curved corner of the tube is (neglect viscous forces)

The area of cross section of the wider tube shown in figure is 900 cm^2 . If the boy standing on the piston weights 45 kg, find the difference in the levels of water in the two tubes.

Water leaks out from an open tank through a hole of area 2mm^2 in the bottom. Suppose water is filled up to a height of 80 cm and the area of cross section of the tankis 0.4 m^2 . The pressure at the open surface and the hole are equal to the atmospheric pressure. Neglect the small velocity of the water near the open surface in the tank. a. Find the initial speed of water coming out of the hole. b. Findteh speed of water coming out when half of water has leaked out. c. Find the volume of water leaked out during a time interval dt after the height remained is h. Thus find the decrease in height dh in term of h and dt. d. From the result of part c. find the time required for half of the water to leak out.

A tank is filled with water to a height h. A hole is made at the bottom of the tank through which water can flow out. Calculate the ratio of time taken to make the level of water from h to h/4" and then "h/4" to 0."

PHYSICS GALAXY - ASHISH ARORA-FLUID MECHANICS-Unsolved Numerical Problems
  1. Consider a horizontally oriented syringe containing water locate at a ...

    Text Solution

    |

  2. A water pipe with interna diameter of 2m carries water at the floor of...

    Text Solution

    |

  3. Water and oil are poured into the two limbs of a U-tube containig merc...

    Text Solution

    |

  4. Pure water is added drop by drop to a vessel of volume V filled with a...

    Text Solution

    |

  5. Water flows out of a big tank along a tube bent at right angles, the i...

    Text Solution

    |

  6. A cylindrical vessel is filled with water upto a height of 1m. The cro...

    Text Solution

    |

  7. An open reactangular tank with tank with dimensions 5xx4mxx3m contains...

    Text Solution

    |

  8. Two holes, each of area A = 0.2 cm^(2) are drilled in the wall of a ve...

    Text Solution

    |

  9. A vertical tube has diameter 0.016 m at its bottom end from which wate...

    Text Solution

    |

  10. A cylinderical tank of height 0.4 m is open at the top and has a diame...

    Text Solution

    |

  11. A large open top container of negligible mass and uniform cross sectio...

    Text Solution

    |

  12. A cylindrical bucket, open at the top, is 0.200 m high and 0.100 m in ...

    Text Solution

    |

  13. A uniform cylindrical block of length l density d(1) and area of cross...

    Text Solution

    |

  14. A ball of density d is dropped on to a horizontal solid surface. It bo...

    Text Solution

    |

  15. A side wall of a wide open tank is provided with a narrowing tube thro...

    Text Solution

    |

  16. A ping-pong ball has a volume V and density (1//10) th of water. What ...

    Text Solution

    |

  17. Water leaks out from an open tank through a hole of area 2mm^2 in the ...

    Text Solution

    |

  18. A steel ball floats in a vessel with mercury. How will be volume of th...

    Text Solution

    |

  19. Water flows through a tube shown in figure. The areas of cross section...

    Text Solution

    |

  20. A jet of water issues vertically at a speed of 0.1 square inch cross-s...

    Text Solution

    |