A steel tape `1 m` long is correctly calibrated for a temperature of `27.0^(@)C`. The length of a steel rod measured by this tape is found to be `63.0 cm` on a hot day when the temperature is `45^(@)C`. Coefficient of linear expansion of steel `= 1.20 xx 10^(-5) //K`. what is the actual length of the steel rod on that day?

A steel tape 1m long is correctly calibrated for a temperature of 27^(@)C . The length of a steel rod measured by this tape is found to be 63.0cm on a hot day when the temperature is 45.0^(@)C . What is the acutual length of the steel rod on that day? what is the length of the same steel rod on a day when the temperature is 27.0^(@)C ? coefficient of linear expansion of steel = 1.20xx10^(-5) .^(@)C^(-1) .

A surveyor's 30 m steel tape is correct at a temperature of 20^@C . The distance between two points, as measured by this tape on a day when the temperature is 35^@C . Is 26m. What is the true distance between the point? (a_("steel")=1.2xx10^(-5@)C )

A clock with a steel pendulum gives accurate time at 30^@C . Calculate the fractional loss or gain in time if temperature changes to 50^@C . Coefficient of linear expansion of steel = 12 xx 10^(-6) ""^@C^(-1)

At temperature T, length of rod is L. If coefficient linear expansion of material of rod is 2 xx 10^(-2)//.^(@)C then length of rod when temperature of rod increased by 25^(@)C is

A steel rod is clamped at its two ends and rests on a fixes horizontal base. The rod is unstrained at 20^C . Find the longitudinal strain debeloped in the tod if the temperature tises to 50^C . Coefficient of linear expansion of steel =1.2 xx 10^(-5_ 0^C(-1) .

A steel scale is correct at 0^(@)C . The length of a brass tube measured by it at 40^(@)C is 4.5m . The correct length of the tube at 0^(@)C is (Coefficients of linear expansion of steel and brass are 11 xx 10^(-6//@)C and 19 xx 10^(-6//@)C respectively).

A horizontal steel railroad track has a length of 100 m when the temperature is 25^(@)C . The track is constrained from expanding or bending. The stress on the strack on a hot summer day, when the temperature is 40^(@)C , is (Note : the linear coefficient of thermal expansion for steel is 1.1xx10^(-5)//.^(@)C and the Young's modulus of steel is 2xx10^(11) Pa)

A metre scale is made up of steel and measures correct length at 16^C . What will be the percentage error if this scale is used (a) on a summer day when the temperature is 46^C and (b) on a winter day when the temperature is 6^C ? Coefficient of linear expansion of steel =11 xx 10^(-6) o^C^(-1) .

The length of each steel rail is 10 m in winter. The coefficient of linear expansion of steel in 0.000012//^(@)C in summer. The gap to be left between the rails