If a machine perform 4000 J output work ...

If a machine perform 4000 J output work and 1000 J is inside loss due to friction , then the find efficiency?

0.8

0.3

0.25

0.6

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

SOLVD PAPERS 2017 NEET, AIIMS & JIPMER
DC PANDEY|Exercise Solved paper 2018(AIIMS)|28 Videos
SIMPLE HARMONIC MOTION
DC PANDEY|Exercise Integer type questions|14 Videos
SOUND WAVES
DC PANDEY|Exercise Exercise 19.7|4 Videos

Similar Questions

Explore conceptually related problems

500 joule of heat energy is supplied to a heat engine and 100 J of heat energy is dissipated due to friction and as sound energy, then the efficiency of the heat engine is ____

An ideal gas undergoes a cyclic process as shown. Part of the process ab is isothermal expansion and work done by the gas in this expansion is 700 J. in adiabatic expansion be it again does 400 J work. If it rejects 100 J heat when it returns to a from c via b' then find efficiency of the cycle.

The amount of work done on a machine is 500 J, and the machine does 80 J of work. What can you say about the amount of friction that the machine has while operating ?

For a refrigerator , heat absorbed from source is 800 J and heat supplied to sink is 500 J then find coefficient of performance is :-

What is the efficiency of a machine if, of the 1000 J of work done by the effort, 200 J are done in overcoming friction?

A body of mass 100 g moving on a test track has final KE of 50 J after traveling a distance of 10 cm. Assuming 90% loss of energy due to friction, find the intial speed of the body

In a conventional vehicle, power is dissipated due to friction . To reduce the loss of power due to friction MAGLEV train using an LEDS (electrodynamic suspension) technology was developed. It works on the principle of Lenz's law. In this system, a train moves without contact with the track due to which there is no loss of power due to friction. The advantage of EDS is that

How much time does it take to perform 500J of work at a rate of 10W?

DC PANDEY-SOLVD PAPERS 2017 NEET, AIIMS & JIPMER-Solved paper 2018(JIPMER)

If a machine perform 4000 J output work and 1000 J is inside loss due ...
Text Solution
|
Dimension of force is
Text Solution
|
The efficiency of an ideal gas with adiabatic exponent 'gamma' for the...
Text Solution
|
Velocity is given by v=4t(1-2t), then find time at which velocity is m...
Text Solution
|
The ratio of the radii of gyration of a circular disc about a tangenti...
Text Solution
|
If compressibility of material is 4xx10^(-5) per atm, pressure is 10...
Text Solution
|
If speed of sound in air is 340 m//s and in water is 1480 m//s.If freq...
Text Solution
|
1000 N force is required to lift a hook nd 10000 N force is reuires to...
Text Solution
|
How much intense is 80 dB sound in comparision to 40 dB?
Text Solution
|
A force of 10 N acts on a body of mass 0.5 kg for 0.25s starting from ...
Text Solution
|
A ball of 0.5 kg colided with wall at 30^(@) and bounced back elastica...
Text Solution
|
Kinetic energy of a particle is increases by 4 times What will be the ...
Text Solution
|
What is the range of a projectile thrown with velocity 98 m//s with an...
Text Solution
|
If the efficiency of an engine is 50% and its work output is 500 J the...
Text Solution
|
An engine has an efficiency of 1/6. When the temperature of sink is re...
Text Solution
|
A ball is thrown upwards with a speed u from a height h above the grou...
Text Solution
|
A body of mass 1 kg executes SHM which is given by y=6.0 cos (100t+...
Text Solution
|
A unifrom rod of mass m and length l(0) is pivoted at one end and is h...
Text Solution
|
A box of mass 8 kg ios placed on a roulgh inclined plane of inclinatio...
Text Solution
|
A mass M is hung with a light inextensible string as shown in Find the...
Text Solution
|