An are lamp operates at 80 V, 10 A. Sugg...

An are lamp operates at 80 V, 10 A. Suggest a method to use it with a 240 V d.c. source. Calculate the value of the electric component required for this purpose.

Text Solution

AI Generated Solution

Topper's Solved these Questions

CURRENT ELECTRICITY
SL ARORA|Exercise Problems From Competitive|18 Videos
CURRENT ELECTRICITY
SL ARORA|Exercise Problems For Self|101 Videos
CHEMICAL EFFECT OF CURRENT
SL ARORA|Exercise TYPE-B|5 Videos
ELECTRIC POTENTIAL AND ELECTRIC FLUX
SL ARORA|Exercise Problems for self practive|61 Videos

Similar Questions

Explore conceptually related problems

A 80 V - 800 W heater is to be operated on a 100 V - 50 Hz a.c. supply. Calculate the inductance of the choke required.

An eletric lamp which runs 100 V d.c and 10-A currect is connected to 200 V ,50 cycle AC mains .Calcualate the inducatance of the choke required.

An electric lamp which runs at 40V and consumes 10A current is connected to AC mains at 100V, 50Hz supply. Calculate the inductance of the required choke for lamp to glow at full brightness.

An electric lamp which runs at 80 volt d.c. and consumes 10 ampere is connected to 100 volt, 50 Hz a.c. mains. Calculate the inductance of the choke required.

An arc lamp consumes 10 A at 40 V . Calculate the power factor when it is connected with a suitable value of choke coil required to run the arc lamp on AC mains of 200 V ("rms") and 50 Hz .

A 6 V - 12 W lamp is connected in series with a source of 12 V supply. Calculate the value of the resistance R for the proper working of the lamp. What is the current flowing through the circuit ?

100 W, 220 V bulb is coonected to 110 V source. Calculate the energy consumed (in unit of electricity) by the bulb in 1 hour.

An electric bulb operates 10 V d.c. If this bulb is connected to an a.c. source and gives normal brightness, then peak value of the source is …….

An AC flourescent lamp needs 1-A currect at 100 V Calculate the inducatance of the choke required to run the lamp on a 50 Hz -220 V supply.

SL ARORA-CURRENT ELECTRICITY-Problems For Self

An are lamp operates at 80 V, 10 A. Suggest a method to use it with a ...
Text Solution
|
One billion electrons pass from a point P towards another point Q in 1...
Text Solution
|
Calculate the number of free electrons passing through the filament of...
Text Solution
|
In the electrolysis of silver chloride, a charge of 4xx10^(5) C is flo...
Text Solution
|
In a hydrogen atom, the electron makes about 0.6xx10^(16) revolutions ...
Text Solution
|
An electron gun emits 2.0xx10^(16) electrons per second. What is the a...
Text Solution
|
An electric current of 2.0 mu A exists in a discharge tube. How much c...
Text Solution
|
An electron moves in a circular orbit of radius 10 cm with a constant ...
Text Solution
|
The current through a wire depends on time as I=I(0)+alpha t, where I(...
Text Solution
|
A current of 4.8 A is flowing in a copper wire of cross-sectional area...
Text Solution
|
A voltage of 30 V is applied across a colour coded carbon resistor wit...
Text Solution
|
The sequence of bands marked on a carbon resistor is yellow , red oran...
Text Solution
|
The resistance of a conductivity wire of length 1.1 m and of diameter ...
Text Solution
|
A metal wire of specific resistance 64xx10^(-6) Omega m and length 1.9...
Text Solution
|
A negligbly small current is passed through a wire of length 15 cm and...
Text Solution
|
Calculate the resistance of a 2 m long nichrome wire of radius 0.321 m...
Text Solution
|
Find the resistance of a hollow cylindrical conductor of length 1.0m a...
Text Solution
|
Calculate the electric field in a copper wire of cross-sectional area ...
Text Solution
|
A given copper wire of resistance R is stretched to reduce its diamete...
Text Solution
|
What will be the change in resistance of a constantan wire when its ra...
Text Solution
|
A wire of resistance 10 Omega is drawn out so that its length is thric...
Text Solution
|