On heating one end of a rod the temperat...

On heating one end of a rod the temperature of the whole rod will be uniform when .

K = 1

K = 0

K = 100

`K = oo

Text Solution

Verified by Experts

The correct Answer is:

`(dQ)/(dT) = -KA(dtheta)/(dx)`, When `K = infty`, `(dtheta)/(dt) = 0`
i.e. `theta` is independent of x, i.e., constnat or uniform

Topper's Solved these Questions

CALORIMETRY AND HEAT TRANSFER
DC PANDEY|Exercise Check points 16.4|25 Videos
CALORIMETRY AND HEAT TRANSFER
DC PANDEY|Exercise Taking it together|47 Videos
CALORIMETRY AND HEAT TRANSFER
DC PANDEY|Exercise Check point 16.2|10 Videos
CALORIMETRY & HEAT TRANSFER
DC PANDEY|Exercise Level 2 Subjective|14 Videos
CENTRE OF MASS
DC PANDEY|Exercise Medical entrances gallery|27 Videos

Similar Questions

Explore conceptually related problems

Assertion : Heat is supplied at constant rate from one end of a conducting rod. In steady state, temperature of all points of the rod becomes uniform. Reason : In steady state, temperature of rod does not increase.

The temperature gradient in a rod of 0.5 m length is 80^(@)C//m . It the temperature of hotter end of the rod is 30^(@)C , then the temperature of the cooler end is

The temperature gradient in a rod of 0.5 m long is 80^(@)C//m . If the temperature of hotter end of the rod is 30^(@)C , then the temperature of the colder end is

Assertion A metallic rod is fixed from two ends as shown in figure. When the temperature is increased compressive stresses are developed in the rod. Reason At higher temperature, natural length of the rod will be more.

Two rods A and B of same metal and of same cross-section have length in the ratio 1:2 One end of each rod is at O^(@)C and temperature of other ends are 30^(@)C and 40^(@)C respectively Which of the rod will have higher flow of heat ? .

A brass rod of length 1 m is fixed to a vertical wall at one end, with the other end keeping free to expand. When the temperature of the rod is increased by 120^@C , the length increases by 3 cm . What is the strain?

In a steady state of heat conduction the temperature of the ends A and B of a rod 100cm long per 0^(@)C and 100^(@)C The temperature of the rod at a point 60cm distant from the end A is .

DC PANDEY-CALORIMETRY AND HEAT TRANSFER-Check points 16.3

The layers of atmosphere are heated through
Text Solution
|
Mud houses are cooler in summer and warmer in winter because
Text Solution
|
Snow is more heat insulating than ice, because
Text Solution
|
On heating one end of a rod the temperature of the whole rod will be u...
Text Solution
|
If the temperature difference on the two sides of a wall increases fro...
Text Solution
|
The thermal conductivity of a rod depends on
Text Solution
|
The unit of thermal conductivity is :
Text Solution
|
Wires A and B have have identical lengths and have circular cross-sect...
Text Solution
|
The end of two rods of different materials with their thermal conducti...
Text Solution
|
The length of the two rods made up of the same metal and having the sa...
Text Solution
|
Three rods made of the same material and having same cross-section are...
Text Solution
|
Two rods A and B are of equal lengths. Their ends of kept between the ...
Text Solution
|
Consider a compound slab consisting of two different material having e...
Text Solution
|
In a steady state of thermal conduction, temperature of the ends A and...
Text Solution
|
Three rods of same dimensions are arranged as shown in Fig. They have ...
Text Solution
|
Figure shows a copper rod joined to a steel rod. The rods have equal l...
Text Solution
|
A wall has two layers A and B, each made of different material. Both t...
Text Solution
|
A metal rod of length 2 m has cross sectional areas 2 A and A as shown...
Text Solution
|
A slab consists of two layers of different materials of the same thick...
Text Solution
|
Two rods of same length and transfer a given amount of heat 12 second,...
Text Solution
|