The diode used in the circuit shown in t...

The diode used in the circuit shown in the figure has a constant voltage drop of `0.5 V` at all currents and a maximum power rating fo `100` milliwatts. What should be the value of the resistor `R`, connected in series with the diode for obtaining maximum current?

`1.5 Omega `

`5 Omega`

`6.67 Omega `

`200 Omega `

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

SEMI CONDUCTOR AND LOGIC GATES
MOTION|Exercise EXERCISE 2|33 Videos
SEMI CONDUCTOR AND LOGIC GATES
MOTION|Exercise EXERCISE 3|34 Videos
ROTATIONAL MOTION
MOTION|Exercise Exercise - 3 ( Section-B )|24 Videos
SIMPLE HARMONIC MOTION
MOTION|Exercise EXERCISE -3 Section - B Previous Year Problems | JEE MAIN|23 Videos

Similar Questions

Explore conceptually related problems

The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor R, connected in series with the diode, for obtaining maximum current put less I. ?

The diode used in the circuit shown in the adjacent figure has a constant voltage drop of 0.5V at all currents and a maximum power rating of 100mW.What should be the value of resistor R connected in series with the diode for obtaining maximum current?

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

In the circuit, if the forward voltage drop for the diode is 0.5 V , the current will be

In the circuit shown in figure, if the A diode forward voltage drop is 0.3 V, the voltage difference between A and B is

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

In the circuit shown in figure, if the diode forward voltage drop is 0.3 V, then the voltage difference between A to B is,

MOTION-SEMI CONDUCTOR AND LOGIC GATES-EXERCISE 3

The diode used in the circuit shown in the figure has a constant volta...
Text Solution
|
If temperature increases, conductivity of semiconductor will be –
Text Solution
|
At 0K, silicon behave as –
Text Solution
|
The energy band gap is maximum in
Text Solution
|
The part of a transistor which is most heavily doped to produce large ...
Text Solution
|
In the middle of the depletion layer of a reverse - biased p - n junc...
Text Solution
|
The difference in the variation of resistance with temperature in a me...
Text Solution
|
A strip of copper and another of germanium are cooled from room tempe...
Text Solution
|
When n-p-n transistor is used as an amplifier
Text Solution
|
A piece of copper and another of germanium are cooled from room temper...
Text Solution
|
The manifestation of band structure in solids is due to
Text Solution
|
When p-n junction diode is forward biased then
Text Solution
|
The electrical conductivity of a semiconductor increases when electrom...
Text Solution
|
In a full wave rectifier circuit operating from 50 Hz mains frequency ...
Text Solution
|
In a common-base amplifier, the phase difference between the input sig...
Text Solution
|
If the ratio of the concentration of electron to that of holes in a se...
Text Solution
|
A solid which is not transperent to visible light and whose conductivi...
Text Solution
|
In a common base mode of transistor, collector current is 5.488 mA for...
Text Solution
|
If the lattice constant of this semiconductor is decreased, then which...
Text Solution
|
In the following, which one of the diodes is reverse biased ?
Text Solution
|
The circuit has two oppositely connected ideal diodes in parallel. Wha...
Text Solution
|