[" The stress for elastic limit of a "],[" material is "3.5times10^(8)N/m^(2)" .The "],[" minimum diameter of a rod made of "],[" this material which can support "500N],[" load without exceeding elastic limit "],[" will be "]

The elastic limit of brass is 379 MPa . What should be the minimum diameter of a brass rod if it is to support a 400 N load without exceeding its elastic limit ?

The elastic limit of an elevator cable is 2xx10^(9) N//m^(2) . The maximum upward acceleration that an elevator of amss 2xx10^(3)kg can have been supported by a cable would not exceed half of the elastic limit would be

If the elastic limit of copper is 1.5xx10^(8) N//m^(2) ,determine the minimum diameter a copper wire can have under a load of 10.0 kg find , if its elastic limit is not to be exceeded.

The elastic limit of stees is 8xx10^8Nm^-2 andits Young modulus 2x10^11Nm^-2 . Find the maximum eleongatin of a half metre steel wire that can be given without exceeding the elastic limit.

A brass rod is to support a load of 400 N. If its elastic limit is 4.0 xx 10^(8) N//m^(2) its minimum diameter must be -

The elastic limit of an elavator cable is 2xx10^(9)N//m^(2) . The maximum upward acceleration that an elavator of mass 2xx10^(3)kg can have when supported by a cable whose cross sectional area is 10^(-4)m^(2) , provided the stres in cable would not exceed half to the elastic limit would be

The breaking stress of a material is 10^(8)Nm^(-2) . Find the greatest length of a wire that could hang vertically without breaking. Density of material =3000kgm^(-3)