Home
Class 11
PHYSICS
The stress for elastic limit of a materi...

The stress for elastic limit of a material is `3.5times10^(8)N/m^(2)` .The minimum diameter of a rod made of this material which can support `500N` load without exceeding elastic limit will be

Promotional Banner

Similar Questions

Explore conceptually related problems

The elastic limit of brass is 379 MPa . What should be the minimum diameter of a brass rod if it is to support a 400 N load without exceeding its elastic limit ?

If the elastic limit of copper is 1.5xx10^(8) N//m^(2) ,determine the minimum diameter a copper wire can have under a load of 10.0 kg find , if its elastic limit is not to be exceeded.

The elastic limit of stees is 8xx10^8Nm^-2 andits Young modulus 2x10^11Nm^-2 . Find the maximum eleongatin of a half metre steel wire that can be given without exceeding the elastic limit.

The elastic limit of an elevator cable is 2xx10^(9) N//m^(2) . The maximum upward acceleration that an elevator of amss 2xx10^(3)kg can have been supported by a cable would not exceed half of the elastic limit would be

The elastic limit of an elavator cable is 2xx10^(9)N//m^(2) . The maximum upward acceleration that an elavator of mass 2xx10^(3)kg can have when supported by a cable whose cross sectional area is 10^(-4)m^(2) , provided the stres in cable would not exceed half to the elastic limit would be

Elastic limit of a particular steel wire is 2.5 xx 10^(10) N//m^(2) maximum strain to which the wire be subjected without losing elasticity is (Y_("steel") = 2 xx 10^(11) N//m^(2))

A stress of 10^(6) N//m^(2) is required for breaking a material. If the density of the material is 3 xx 10^(3) Kg//m^(3) , then what should be the minimum length of the wire made of the same material so that it breaks by its own weight (g = 10m//s^(2))

A brass rod is to support a load of 400 N. If its elastic limit is 4.0 xx 10^(8) N//m^(2) its minimum diameter must be -

A sonometer wire has a length of 0.75 m and density of the material of the wire is 10^(4) kg//m^(3) . If the wire can bear a stress of 7.5 xx 10^(8) N//m^(2) without exceeding the elastic limit, what fundamental frequency can be produced in the wire ?