To verify Ohm's law, a student is provid...

To verify Ohm's law, a student is provided with a test resistor `R_T`, a high resistance `R_1`, a small resistance `R_2`, two identical galvanometer `G_1 and G_2`, and a variable voltage source V. The correct circuit to carry out the experiment is

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

CURRENT ELECTRICITY
MOTION|Exercise EXERCISE -4 (Level -I)|37 Videos
CONSTRAINED MOTION
MOTION|Exercise EXAMPLES|12 Videos
ELASTICITY
MOTION|Exercise EXERCISE -3|60 Videos

Similar Questions

Explore conceptually related problems

To verify Ohm's law, a student is provided with a test resistor R_(T) , a high resistance R_(1) . a small resistance R_(2) , two identical galvometers G_(1) and G_(2) and voltage source V . The correct circuit to carry out the experiment is.

If G,r_(A) and r_(V) denote the internal resistances of a galvanometer, an ammeter and a voltmeter among the following the correct relationship is

In the curcuit given below D_(1) and D_(2) are two identicall diodes and V is a sinusoidal voltage source the voltage drop across the resistance R_(L)

Consider two identical galvanometers and two identical resistors with resistance R . If the internal resistance of the galvanometers R_(c) lt R//2 , which of the following statement(s) about any one of the galvanometers is (are) true?

Two resistors of resistance R_1 and R_2 having R_1>R_2 are connected in parallel. For equivalent resistance R, the correct statement is

Two resistors of resistance R_(1) and R_(2) having R_(1) gt R_(2) are connected in parallel. For equivalent resistance R, the correct statement is

The circuit has resistors of equal resistance R. The equivalent resistance between A and B, when key is closed is R_1 and when key is open is R_2 . Find the ratio R_1 and R_2 .

In the circuit shown, both cells are ideal and of fixed emf, the resistance of resistance R_(1) has fixed resistance and the resistance of resistor R_(2) can be varied (but the value of R_(2) is not zero). Then:

Two students made two circuits A and B to determine the resultant resistance of two resistors R_(1) and R_(2) connected in series : All the components have been connected correctly in :

MOTION-CURRENT ELECTRICITY-EXERCISE -4 (Level -II)

Figure shows three resistor configurations R1,R2 and R3 connected to 3...
Text Solution
|
Statement-1 : In a Meter Bridge experiment, null point for an unknown ...
Text Solution
|
For the circuit shown in the figure
Text Solution
|
Consider a thin square sheet of side L and thickness t, made of a mate...
Text Solution
|
Incandescent bulbs are designed by keeping in mind that the resistance...
Text Solution
|
To verify Ohm's law, a student is provided with a test resistor RT, a ...
Text Solution
|
When two identical batteries of internal resistance 1Omega each are co...
Text Solution
|
A meter bridge is set up as shown, to determine an unknown resistance ...
Text Solution
|
Two batteries of different emfs and different internal resistances are...
Text Solution
|
For the resistance network shown in the figure , choose the correct op...
Text Solution
|
Two ideal batteries of emf V(1)andV(2) and these resistances R(1),R(2)...
Text Solution
|
Heater of an electric kettle is made of a wire of length L and diamete...
Text Solution
|
A galvanometer gives full scale deflection with 0.006 A current . By c...
Text Solution
|
In an aluminium (Al) bar of square cross section, a square hole is dri...
Text Solution
|
In the following circuit, the current through the resistor R (=2Omega)...
Text Solution
|
An infinite line charge of uniform electric charge density lambda lies...
Text Solution
|
An incandesent bulb has a thin filament of tungsten that is heated to ...
Text Solution
|
Consider two identical galvanometers and two identical resistors with ...
Text Solution
|
In the circuit shown below, the key is pressed at time t = 0 . Which o...
Text Solution
|
Two identical moving coil galvanometers have 10Omega resistance and fu...
Text Solution
|