Home
Class 12
PHYSICS
A circuit is set up by connecting L=100m...

A circuit is set up by connecting L=100mH, C`=5muF` and R`=100Omega` in series. An alternating emf of 150` sqrt(2)V,(500)/(pi) Hz is applied across this series combination. Which of the following is correct:

A

the impedence of the circuit is `1.41Omega`

B

the average power dissipated across resistance is 225W

C

the average power dissipated across inuctor is zero

D

the average power dissipated across capacitor is zero

Text Solution

Verified by Experts

The correct Answer is:
A, B, C, D
Promotional Banner

Similar Questions

Explore conceptually related problems

An inductance of 100 mH and a resistance of 100 Omega are connected in series and an alternating emf of peak value 100 V, 50 Hz is applied across the combination. The power factor of the circuit is

A capacitor of capacitance 2 muF and resistance of 100 Omega are connected in series and an alternating emf of frequency 1 kHz is applied across the combination. The phase difference between applied emf and current is nearly

In an L C R circuit having L = 8 H, C = 0 5muF and R=100Omega in series, the resonance frequency in rad/s is

An inductance of 0.4/(pi) henry and a resistace of 30 Omega are joined in series. If an alternating e.m.f. of 200 V, 50 Hz is applied to their combination, then the impedance of the circuit will be

An LCR series circuit contains L = 8 H, C = 0.5 muF and R =100 Omega The resonant frequency of the circuit is .

An alternating EMF of frequency (1)/(2pi sqrt(LC)) is applied to a series LCR circuit. For this frequency of the applied EMF,

A circuit contains resistance R and an inductance L in series. An alternating voltage V=V_0sinomegat is applied across it. The currents in R and L respectively will be .

In inductance of (4//pi) H and the resistor R, are connected in series and an alternating emf of frequency 50 Hz is applied across combination. If phase difference between applied emf and current is 45^(@) then the value of R is

An AC circuit has R= 100 Omega , C= 2 mu and L= 80 mH, connected in series. The quality factor of the circuit is :

Two capacitors of capacitances 3muF and 5muF respectively are connected in parallel and this combination is connected in series with a third capacitor of capacitance 2muF . A potential difference of 100 V is applied across the entire combination. The charge and the potential difference across the third capacitor is