Home
Class 12
PHYSICS
In a hydraulic jack as shown, mass of th...

In a hydraulic jack as shown, mass of the car is m = 800 kg,`A_(1) = 10 cm^(2) , A_(2) = 10 m^(2)` . The minimum force F required to lift the car is

A

1 N

B

0.8 N

C

8N

D

16N

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

In a hydraulic jack as shown, mass of the car =W=800kg, A_(1)=10cm6(2), A_(2)=10m^(2) . What is the the minimum force F required to lift the car ? Take g=10m//s^(2)

The figure shows a schematic layout of hydraulic jack. The load to be raised weighs 20,000N. The area of cross section of the two pistons are A_(1)=50cm^(2) and A_(2)=10cm^(2) . The force (F) is applied at theend of a ligh lever bar as shown in the figure. Lenghts a and b are 4cm and 36cm respectively. Find the force (F) required to raise the load slowly.

In a hydraulic press, radii of connecting pipes, r_(1) and r_(2) are in the ratio 1:2 . In order to lift a heavy mass M on the larger piston, the small piston must be pressed through a minimum force f equal to

An automobile back is lifted by a hydraulic jack that consists of two pistons. The large piston is 70 cm in diameter and the small piston is 8 cm in dimater. If W is the weight of the car, how much smaller a force is required on the small piston in order to lift the car ?

The average mass that can be lifted by a hydraulic press is 100kg. If the radius of the larger piston is six times that of a smaller poston. What is the minimum force (in kg wt) that must be applieed? Use g=10ms^(-2) .

An automobile sack is lifted by a hydraulic jack that consists of two pistons. The large piston is 1 m in diameter and the small piston is 10 cm in diameter. If W be the weight of the car, how much smaller a force is needed on the small piston to lift the car?

A lift of mass 920 kg has a capacity of 10 persons. If average mass of person is 68 kg. Friction force between lift and lift shaft is 6000 N. The minimum power of motor required to move the lift upward with constant velocity 3 m/s is [ g = 10 m/s^2 ]

A car is to be lifted by a hydraulic jack which consists of two pistons. The large piston is 80 cm in diameter and the smaller piston is 16 cm in diameter. If W is the weight of the car, then how much smaller force is needed on small pistonto lift the car?

The diameter of the piston of a hydraulic automobile is D metre. What pressure, in atmosphere is required to lift a car of mass m kg ?

A car is moving on a circular track of diameter 72 m with a speed of 6 m/s . It is acclereration at the rate of sqrt(3) m//s^(2) If the mass of the car is 1000 kg , the net force acting on the car is :