Home
Class 12
PHYSICS
Find the maximum value of current when i...

Find the maximum value of current when inductance of two henry is connected to 150 volt, 50 cycle supply.

Text Solution

Verified by Experts

`(3)/(2sqrt2A)`
Promotional Banner

Topper's Solved these Questions

  • AC CIRCUITS

    FIITJEE|Exercise ASSIGNMENT PROBLEMS (SUBJECTIVE)(leve II)|15 Videos

  • AC CIRCUITS

    FIITJEE|Exercise ASSIGNMENT PROBLEMS(OBJECTIVE)(level I)|20 Videos

  • AC CIRCUITS

    FIITJEE|Exercise Exercise|3 Videos

  • COLLISION

    FIITJEE|Exercise (NUMERICAL BASED QUESTIONS)|4 Videos

Similar Questions

Explore conceptually related problems

Find the maximum value of current when an inductance of one henry is connected to an a.c. source of 200 volts, 50 Hz

A coil having a resistance of 50.0 Omega and an inductance of 0.500 henry is connected to an AC source of 110 volts , 50.0 cycle//s. Find the rms value of the current in the circuit.

A coil of 0.01 henry inductance and 1 ohm resistance is connected to 200 volt, 50 Hz ac supply. Find the impedance of the circuit and time lag between max. alternating voltage and current.

Find the value of current through an inductance of 2.0 H and negligible resistance, when connected to an a.c. source of 150 V, 50 Hz .

When a coil is connected to a D.C. source of e.m.f. 12 volt, then a current of 4 ampere flows in it. If the same coil is connected to a 12 volt, 50 cycle/s A.C. source, then the current flowing in it is 2.4A . The self inductance of the coil will be

A coil of 20Omega resistance and 0.1 henry inductance is connected to 220 V volt 50 cycle mains .What is the impedance of the coil ? What currect does it draw Does the current lead or lag and by how much?

A solenoid has an inductance of 60 henrys and a resistance of 30 ohms. If it is connected to a 100 volt battery. How long will it take for the current to reach (e-1)/(e)~=63.2% of its final value

A capacitor of capacitance 100 muF and a coil of resistance 50 ohm and inductance 0.5 henry are connected in series with 110 volt and 50 Hz source . Calculate the impedance of the circuit.

An AC circuit consists of a resistor of 5Omega and inductor of 10 mH connected in series with 50 volt, 50 Hz supply. The capacitance that should be connected in series with the circuit to obtain maximum current is

A circuit has a resistance of 50 ohms and an inductance of 3/pi henry.It is connected in series with a condenser of 40/pi muF and AC supply voltage of 200 V and 50 cycles/sec.Calculate (i)the impedance of the circuit. (ii)the p.d. across inductor coil and condenser. (iii)Power factor