Home
Class 12
PHYSICS
Cement, sand and seree are dropped in ro...

Cement, sand and seree are dropped in rotating cylidrical drum to make concrete mixture. If rotating speed of drum is very high then contents are attached to wall of drum and mixture is not formed correctly. If radius of drum is 1.25 m and its axis is horizontal, then the required maximum rotating speed to make good mixture in rpm is -

A

8

B

0.4

C

1.3

D

27

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Topper's Solved these Questions

Similar Questions

Explore conceptually related problems

A wet umbrella is held upright (see figure). The man holding it is rotating it about its vertical shaft at an angular speed of omega = 5 rad s^(–1) . The rim of the umbrella has a radius of r = 0.5 m and it is at a height of H = 1.8 m from the floor. The man holding the umbrella gradually increases the angular speed to make it 2 omega . Calculate the area of the floor that will get wet due to water drops spun off the rim and hitting the floor. [g = 10 m//s^(2)] .

A 70kg man stands in contact against the inner wall of a hollw cylindrical drum of radius 3m rotating about its verticle axis. The coefficient of friction between the wall and his clothing nis 0.15 . What is the minimum rotational speed of the cylinder to enable the man to remain stuck to the wall (without falling) when the floor is suddenly removed?

A person stands in contact against a wall of cylindrical drum of radius 'r' rotating with an angular velocity omega . If mu is coefficient ofn static fiction between the wall and the person , then the minimum rotational speed which enables the person to remain struck to the wall will be

A uniform disc of radius 'a' and mass 'm' is rotating freely with angular speed omega in a horizontal plane about a smooth fixed vertical axis through its centre. A particle of mass 'm' is then suddenly attached to the rim of the disc and rotates with it. The new angular speed is

A coin is placed at the edge of a horizontal disc rotating about a vertical axis through its axis with a uniform angular speed 2 rad s^(-1) . The radius of the disc is 50 cm. Find the minimum coefficient of friction between disc and coin so that the coin does not slip. (Take g = 10 m//s^(2) )

(a) Draw a schematic diagram of an AC generator. Explain is working and obtain the expression for the instantaneous value of the emf in terms of the magnetic field B, number of turns N of the coil of area A rotating with angular frequency omega . Show how an alternating emf is generated by loop of wire rotating in a magnetic field. (b) A circular coil of radius 10 cm and 20 turns is rotated about its vertical diameter with angular speed of 50 rad s^(-1). in a uniform horizontal magnetic field of 3.0xx10^(-2)T . (i) Calculate the maximum and average emf induced in the coil. (ii) If the coil forms a closed loop of resistance 10 Omega , calculate the maximum current in the coil and the average power loss due to Joule heating.