A 100 W 200 V bulb is connected to a 160...

A `100 W 200 V` bulb is connected to a `160 V` power supply. The power consumption would be

80W

125W

64W

100W

Text Solution

Verified by Experts

Topper's Solved these Questions

CIRCULAR MOTION
ALLEN|Exercise EXERCISE (J-A)|6 Videos
GEOMETRICAL OPTICS
ALLEN|Exercise subjective|14 Videos

Similar Questions

Explore conceptually related problems

A 100 W, 200 V bulb is connected to a 160 V supply. The power consumption would be

100 W,220V V bulb is connected to 110V source. Calculate the power consumed by the bulb.

A 100W-220V bulb is connected to 110 V source. Calculate the power consumed by the bulb.

A 100W, 200V bulb is operated on a 110V line. The power consumed is

An electric bulb marked as 50 W-200 V is connected across a 100 V supply. The present power of the bulb is

(a) A 220V-100W bulb is connected to 110V source. Calculate the power consumed by the blub. (b) Calculate the following for a 100W - 200V bulb (i) Resistance of the filament of bulb (ii) Current through bulb when it is connected to 200V line (iii) Power consumed when bulb is connected to 100V line (c) An electric bulb rated 100W -200V is used in a circuit having 400V supply. what resistance R must be put in series with bulb so that bulb delivers 100W ? (d) Repeat the previous problem, if bulb delivers 25W . (e) Two bulbs, 50W-220V, 100W-200V are connected in series across a 220V supply. find the power consumed by each bulb.

A 200 W- 200 V lamp is connected to 250 V mains.it power consuption is

A 200W and a 100W , both meant for operation a t 220V are connected to a 220V supply. The total power consumed by them will be (i) 300W, if connected in series (ii) 300W, if connected in parallel (iii) (200)/(3)W , if connected in series (iv) (200)/(3)W , if connected in parallel

Two bulbs one of 200 volts, 60 watts & the other of 200 volts, 100 watts are connected in series to a 200 volts supply. The power consumed will be

ALLEN-CURRENT ELECTRICITY-All Questions

The smallest temperature difference that can be measured with a combin...
Text Solution
|
Two bulbs of (40W 200V) and (100W 200V). Then correct relation for the...
Text Solution
|
A 100 W 200 V bulb is connected to a 160 V power supply. The power con...
Text Solution
|
The EMF generated across a thermocouple with cold junction at 0^(@)C ,...
Text Solution
|
Two electric bulbs (60 W and 100 W respectively) are connected in seri...
Text Solution
|
An electric bulb is designed to draw P(0) power at V(0) voltage. If t...
Text Solution
|
A battery supplies 150W and 196 W power to two resistance of 6Omega an...
Text Solution
|
The temperature at which thermal electric power of a thermo couple bec...
Text Solution
|
Two electric bulbs rated P(1) watt V volt and P(2) watt V, these are j...
Text Solution
|
The coil of a 1 000W electric heater is cut into two equal parts. If t...
Text Solution
|
n identical bulbs, each designed to draw a power p from a certain volt...
Text Solution
|
If the temperatures on both ends of a conductors are different then th...
Text Solution
|
The wires of two electric heaters are made up of same material and hav...
Text Solution
|
The bulbs of 40W,100W and 200watt are connected in series with a volta...
Text Solution
|
A fuse wire with radius 1 mm blows at 1.5 amp . The radius of the fuse...
Text Solution
|
Two 220 V,100 W bulbs are connected first in series and then in parall...
Text Solution
|
An electric kettle has tow heating coils. When one of the coils connec...
Text Solution
|
Fuse wire is a wire of :
Text Solution
|
When electric bulbs of same power, but different marked voltage are co...
Text Solution
|
When three identical bulbs of 60 W, 200 V rating are connected in seri...
Text Solution
|