Home
Class 12
PHYSICS
The length of a solenoid is 0.1m and its...

The length of a solenoid is `0.1m` and its diameter is very small . A wire is wound over in two layers. The number of turns in the inner layer is 50 and that on the outer layer is 40. The strength of current flowing in two layers in the same direction is 3 ampere. The magnetic induction in the middle of the solenoid will be

Promotional Banner

Similar Questions

Explore conceptually related problems

A long solenoid has 800 turns per metre length of solenoid A current of 1.6 A flow through it. The magnetic induction at the end of the solenoid on its axis is

The magnetic induction at the centre of a solenoid is B . If the length of the solenoid is reduced to half and the same wire is would in two layers the new magnetic induction is

The magnetic induction at the centre of a solenoid is B . If the length of the solenoid is reduced to half and the same wire is would in two layers the new magnetic induction is

A very long solenoid of length L has n layers. There are N turns in each layer. Diameter of the solenoid is D and it carries current I. The magnetic field at the centre of the solenoid is ______

An air-solenoid has 500 turns of wire in its 40 cm length. If the current in the wire be 1.0 ampere then the magnetic field on the axis inside the solenoid is -

A solenoid is 3 m long and its inner diameter is 4.0 cm . It has three layers of windings of 2000 turns each and carries a current of 2.0 amperes. The magnetic flux for an cross-section of the solenoid is nearly