The dielectric strength of air is 3.0 xx...

The dielectric strength of air is `3.0 xx 10^(8)V//m`. A parallel plate air capacitor has area `20 cm^(2)` and plate separation `sqrt2mm`. Find the maximum rms voltage of an AC source which can be safely connected to this capacitor.

Text Solution

Verified by Experts

The correct Answer is:

3.0kV

Topper's Solved these Questions

ALTERNATING CURRENT
RESONANCE|Exercise SECTION D: Resonance|10 Videos
ALTERNATING CURRENT
RESONANCE|Exercise SECTION E:|6 Videos
ALTERNATING CURRENT
RESONANCE|Exercise SECTION B|15 Videos
ATOMIC PHYSICS
RESONANCE|Exercise Advanved level problems|17 Videos

Similar Questions

Explore conceptually related problems

The dielectric strength of air is 3.0 xx 10^6 V/m . A parallel-plate air-capacitor has area 20 cm^2 and plate separation 0.10 mm .Find the maximum rms voltage of an AC source which can be safely connected to this capacitor.

A parallel plate capacitor of plate area (1xx3) m^(2) and plate separation 5.0 mm is charged to 10 kV in air. Find charge density and field displacement.

A parallel-plate capacitor with plate are 20cm^(2) and plate separation 1.0mm is connected to a battery .The resistance of the circuit is 10k(Omega) .Find the time constant of the circuit.

A parallel plate air capacitor has plates of area 0.5 m^(2) and plate separation of 2 cm. if epsi_(0)=8.8xx10^(-12)C^(2)//N-m^(2) then the capacitance of the capacitor is

The plates of a parallel plate capacitor have an area of 100cm^(2) each and area separated by 2.5 mm. the capacitor is charged to 200V. Calculate the energy stored in the capacitor.

Calculate capacitance of a parallel plate capacitor with area of each plate 1 cm^(2) and separation 1 mm.

A parallel plate capacitor is constructed with plates of area 0.0280 m^(2) and separation 0.550 mm . Find the magnitude of the charge on each plate of this capacitor when the potential between the plates is 20.1 V

A parallel plate capacitor having a plate separation of 2mm is charged by connecting it to a 300v supply. The energy density is

A parallel plate capacitor has capacitance of 1.0 F . If the plates are 1.0 mm apart, what is the area of the plates?

RESONANCE-ALTERNATING CURRENT-SECTION C

The dielectric strength of air is 3.0 xx 10^(8)V//m. A parallel plate ...
Text Solution
|
An electric bulb is designed to consume 55 W when operated at 110 volt...
Text Solution
|
In a series LCR circuit with an AC source, R = 300 Omega, C = 20 muF, ...
Text Solution
|
Consider the situation of the previous problem. Find the average elect...
Text Solution
|
A 20 volts 5 watt lamp (amp to be treated as a resistor) is used on AC...
Text Solution
|
A circuit has a resistance of 50 ohms and an inductance of 3/pi henry....
Text Solution
|
A coil draws a current of 1.0 ampere and a power of 100 watt from an A...
Text Solution
|
An inductor 2//pi Henry, a capacitor 100//T muF and a resistor 75Omega...
Text Solution
|
A 0.21-H inductor and a 88-Omega resistor are connected in series to a...
Text Solution
|
A 100 volt AC source of angular frequency 500 rad/s is connected to a ...
Text Solution
|
A pure resistive circuit element X when connected to an ac supply of p...
Text Solution
|
In an AC circuit, a resistance of Rohm is connected is series with an ...
Text Solution
|
In an ac circuit the potential differences across an inductance and re...
Text Solution
|
An alternating voltage E=200sqrt(2)sin(100t) is connected to a 1 micro...
Text Solution
|
When 100 V DC is applied across a solenoid, a steady current of 1 A fl...
Text Solution
|
In an LCR series ac circuit the voltage across L,C and R are V(1), V(2...
Text Solution
|