Home
Class 12
PHYSICS
A 0.21-H inductor and a 88-Omega resisto...

A 0.21-H inductor and a `88-Omega` resistor are connected in series to a 220-V, 50-Hz AC source. The current in the circuit and the phase angle between the current and the source voltage are respectively. `(Use pi= 22//7)`

A

`2A, tan^(-1)3//4`

B

`14.4A, tan^(-1)7//8`

C

`14.4A, tan^(-1)8//7`

D

`3.28A, tan^(-1)2//11`

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Topper's Solved these Questions

  • ALTERNATING CURRENT

    RESONANCE|Exercise SECTION D: Resonance|10 Videos

  • ALTERNATING CURRENT

    RESONANCE|Exercise SECTION E:|6 Videos

  • ALTERNATING CURRENT

    RESONANCE|Exercise SECTION B|15 Videos

  • ATOMIC PHYSICS

    RESONANCE|Exercise Advanved level problems|17 Videos

Similar Questions

Explore conceptually related problems

A 0.21 H inductor and a 12 Omega resistance are connected in series to a 220 V, 50 Hz ac source. The current in the circuit is

A 0.21 H inductor and a 12 ohm resistance are connected in series to a 220 V . 50 Hz ac source. Calculate the current in the circuit and the phase angle between the current and the source voltage.

A 0.07 H inductor and a 12 Omega resistor are connected in series to a 220 V, 50 Hz ac source. The approximate current in the circuit and the phase angle between current and source voltage are respectively. [Take pi as (22)/(7) ]

A 9//100 (pi) inductor and a 12 Omega resistanace are connected in series to a 225 V, 50 Hz ac source. Calculate the current in the circuit and the phase angle between the current and the source voltage.

A (9)/(100pi) H inductor and a 12ohm resitance are connected in series to a 225V, 50Hz ac source. Calculate the current in the circuit and the phase angle betweent the current and the source voltage.

A 0.21 H inductor and a 12 Omega resistance are connected in series to a 220 V, 50 Hz ac source. the phase angle between the current and the source voltage is

A 31.4Omega resistor and 0.1H inductor are connected in series to a 200V, 50Hz ac source. Calculate (i) the current in the circuit

A 12 ohm resistor and a 0.21 henry inductor are connected in series to an AC source operating at 20volts, 50 cycle/second. The phase angle between the current and the source voltage is

A 0.2 k Omega resistor and 15 mu F capacitor are connected in series to a 220 V, 50 Hz ac source. The impadance of the circuit is

A 0.01 H inductor and sqrt(3)pi Omega resistance are connected in series with a 220 V, 50 Hz AC source. The phase difference between the current and emf is

RESONANCE-ALTERNATING CURRENT-SECTION C
  1. The dielectric strength of air is 3.0 xx 10^(8)V//m. A parallel plate ...

    Text Solution

    |

  2. An electric bulb is designed to consume 55 W when operated at 110 volt...

    Text Solution

    |

  3. In a series LCR circuit with an AC source, R = 300 Omega, C = 20 muF, ...

    Text Solution

    |

  4. Consider the situation of the previous problem. Find the average elect...

    Text Solution

    |

  5. A 20 volts 5 watt lamp (amp to be treated as a resistor) is used on AC...

    Text Solution

    |

  6. A circuit has a resistance of 50 ohms and an inductance of 3/pi henry....

    Text Solution

    |

  7. A coil draws a current of 1.0 ampere and a power of 100 watt from an A...

    Text Solution

    |

  8. An inductor 2//pi Henry, a capacitor 100//T muF and a resistor 75Omega...

    Text Solution

    |

  9. A 0.21-H inductor and a 88-Omega resistor are connected in series to a...

    Text Solution

    |

  10. A 100 volt AC source of angular frequency 500 rad/s is connected to a ...

    Text Solution

    |

  11. A pure resistive circuit element X when connected to an ac supply of p...

    Text Solution

    |

  12. In an AC circuit, a resistance of Rohm is connected is series with an ...

    Text Solution

    |

  13. In an ac circuit the potential differences across an inductance and re...

    Text Solution

    |

  14. An alternating voltage E=200sqrt(2)sin(100t) is connected to a 1 micro...

    Text Solution

    |

  15. When 100 V DC is applied across a solenoid, a steady current of 1 A fl...

    Text Solution

    |

  16. In an LCR series ac circuit the voltage across L,C and R are V(1), V(2...

    Text Solution

    |