Home
Class 12
PHYSICS
If the maximum wavelength of X-rays prod...

If the maximum wavelength of X-rays produced from a Coolidge tube is 0.062 nm then the potential difference between the cathode and target material is

A

2000 V

B

20,000 V

C

`2xx10^(5)` V

D

`6.2xx10^(3)` V

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

Cutoff wavelength of X-rays coming from a Coolidge tube depends on the

The minimum wavelength of X-rays produced in an X-ray tube at 1000 kV is

50% of the X-ray coming from a Coolidge tube is able to pass through a 0.1 mm thick aluminum foil. If the potential difference between the target and the filament is increased, the fraction of the X-ray passing through the same foil will be

50% of the X-ray coming from a Coolidge tube is able to pass through a 0.1 mm thick aluminum foil. The potential difference between the target and the filament is increased. The thickness of aluminum foil, which will allow 50% of the X-ray to pass through, will be

Two discharge tubes have identical material structure and the same gas is filled in them. The length of one tube is 10cm and that of th other tube is 20cm. Sparking starts in both the tubes when the potential difference between the cathode and the anode is 100 V . If the pressure in the shorter tube is 1.0 mm of mercury, what is the pressure in the longer tube?

The minimum wavelength of the X-rays produced by electrons accelerated through a potential difference of V volts is directly proportional to

The minimum wavelength of the X -rays produced by electrons accelerated through a potential difference of V volts is directly proportional to

The shortest wavelength of X-rays, emiited from a X-ray tube, depend upon

The shortest wavelength of X-ray emitted from an X-ray tube depends upon.

Figure shows the intensity-wavelength relations of X-rays coming from two different Coolidge tube. The solid curve represents the relation for the tube A in which the potential difference between the target and the filament is V_a and the atomic number of the target material is Z_A . These quantities are V_beta and Z_beta for the other tube. Then,