A booster pump can be used for fillin...

A booster pump can be used for filling as well as for emptying a tank. The capacity of the tank is 2400 m3. The emptying capacity of the tank is 10 m3 per minute higher than its filing capacity and the pump needs 8 minutes lesser to empty the tank than it needs to fill it. What if the filling capacity of the pump? `50\ m^3//m in` b. `72\ "m"^3//"min"` c. `60\ m^3//m in` d. none of these

Text Solution

AI Generated Solution

Topper's Solved these Questions

PIE CHART
RS AGGARWAL|Exercise All Questions|29 Videos
PROBABILITY
RS AGGARWAL|Exercise All Questions|57 Videos

Similar Questions

Explore conceptually related problems

A pump can be operated both for filling a tank and for emptying it. The capacity of tank is 2400 m^3 . The emptying capacity of the pump is 10 m^3 per minute higher than its filling capacity. Consequently, the pump needs 8 minutes less to empty the tank to fill it. Find the filling capacity of pump.

A pump can be used either to fill or to empty a tank.The capacity of the tank is 3600m^(3). The emptying capacity of the pump is 10(m^(3))/(min) higher than its filing capacity.The emptying capacity of the pump,if pump needs 12more minutes to fill the tank than to empty it is -

A pump can be used to either fill or drain a tank.The capacity of the tank is 3600m^(3). The draining capacity of the pump 10(m^(3))/( min higher ) than its filling capacity.What is the draining capacity of the pump if it takes 12 minutes more to fill the tank than to drain it?

A tank of 4800m^(3) capacity is full of water. The discharging capacity of the pump is 10m^(3) /min higher than its filling capacity. As a result the pump needs 16 min less to discharge the fuel than to fill up the tank. Find the filling capacity of the pump.

Pipe A is an inlet pipe filling the tank at 8000 l/h .Pipe B empties the tank in in 3 hours. The capacity of the tank is

If the capacity of a cylindrical tank is 1848m^(3) and the diameter of its base is 14m, the depth of the tank is

A tap can fill a tank in 20 minutes. If a leakage is capable of emptying the tank in 60 minuts, the tank will be filled inn

Pipe A can fill a tank in 2 hours at the rate of the 6 litres per minute. What is the capacity of the tank?

RS AGGARWAL-PIPES AND CISTERNS-All Questions

Two pipes A and B can fill a tank in 6 hours and 4 hours respective...
Text Solution
|
Three taps A, B and C can fill tank in 12,15 and 20 hours respectively...
Text Solution
|
Pipe A can fill a tank in 10 hours, Pipe B can fill the same tank i...
Text Solution
|
A booster pump can be used for filling as well as for emptying a ta...
Text Solution
|
A leak in the bottom of a tank can empty the full Tank in 8 hours. ...
Text Solution
|
Two pipes can fill a tank in 20 and 24 minutes respectively and a w...
Text Solution
|
Two pipes A and B can fill a cistern in 37(1/2) and 45 min, respective...
Text Solution
|
A cistern can be filled by two pipes filling separately in 12 and 1...
Text Solution
|
Three pipes can fill a reservoir in 10, 15 and 20 hours respectivel...
Text Solution
|
Three pipes A, B and C can fill a tank in 6 hours. After working at...
Text Solution
|
A bath can be filled by the cold water pipe in 10 minutes and by th...
Text Solution
|
Large fresh water reservoir is fitted with two types of feeder pipe...
Text Solution
|
A town is supplied with water from a big overhead tank which is fed...
Text Solution
|
Water flows through a cylindrical pipe of internal diameter 7 cm at...
Text Solution
|
An outlet pipe can empty a cistern in 3 hours. In what time will th...
Text Solution
|
Two pipes A and B can fill a tank in 24h and 30 h respectively. If ...
Text Solution
|
A tank is 7 metre long and 4 metre wide. At what and speed should w...
Text Solution
|
Two pieces A and B can fill a tank in 18 hrs and 6 hrs respectively...
Text Solution
|
Two pipes can fill a tank in 12 hours and 16 hours respectively. A ...
Text Solution
|
a tank has two outlets A and B, which together take 6h to empty a f...
Text Solution
|