Figure shows a copper rod joined to a steel rod. The rods have equal length and and the equal cross sectional area. The free end of the copper rod is kept at `0^(@)C` and that of the steel rod is kept at `100^(@)C` . Find the temperature at the junction of the rods. conductivity of copper `=390WM^(-1)`^(@)C^(-1)` and that of steel `=46Wm^(-1)`(@)C^(-1)` .

Figure shows a copper rod joined to a steel rod. The rods have equal length and equal cross-sectional area. The free end of the copper rod is kept at 0^@C and that of the steel rod is kept at 100^@C . Find the temperature theta at the junction of the rods. Conductivity of copper =390 W//m-^@C and that of steel = 46 W//m-^@C . .

Two rods having thermal conductivity in the ratio of 5 : 3 having equal lengths and equal cross-sectional area are joined by face to face. If the temperature of the free end of the first rod is 100^(@)C and free end of the second rod is 20^(@)C . Then temperature of the junction is

An aluminium rod and a copper rod of equal length 1.0 m and cross-sectional area. 1cm^(2) are welded together as shown in figure. One end is kept at a temperature of 20^(@)C and the other at 60^(@)C Calculate the amount of heat taken out per second from the hot end. thermal conductivity of aluminium =200Wm^(-1)C^(-1) and of copper =390Wm^(-1)C^(-1) .

An aluminium rod and a copper rod of equal length 1.0 m and cross-sectional area. 1cm^(2) are welded together as shown in figure. One end is kept at a temperature of 20^(@)C and the other at 60^(@)C Calculate the amount of heat taken out per second from the hot end. thermal conductivity of aluminium =200Wm^(-1)C^(-1) and of copper =390Wm^(-1)C^(-1) .

An aluminium rod and a copper rod of equal length 1.0 m and cross-sectional area. 1cm^(2) are welded together as shown in figure. One end is kept at a temperature of 20^(@)C and the other at 60^(@)C Calculate the amount of heat taken out per second from the hot end. thermal conuctivity of aluminium =200Wm^(-1) ^(@)C^(-1) and of copper =390Wm^(-1) ^(@)C^(-1) .

The thermal conductivity of copper is four times that of brass. Two rods of copper and brass of same length and cross-section are joined end to end. The free end of copper rod is at 0^(@)C and that of brass rod at 100^(@)C . Calculate the temperature of junction at equilibrium. neglect radiation losses.

Three rods are made from the same material and having the same cross-sectional area and length have been joined as shown in the figure. The left end and right end are kept 0^@C and 100^@C , respectively . The temperature of the junction of three rods will be

Three rods are made from the same material and having the same cross-sectional area and length have been joined as shown in the figure. The left end and right end are kept 0^@C and 100^@C , respectively . The temperature of the junction of three rods will be