Suggest a method to fill water in a tank...

Suggest a method to fill water in a tank constructed at a height of 10 m from the ground by using a vacuum pump instead of an electric pump.

Text Solution

Verified by Experts

Construct a tank at a height of 10 m and create vacumn inside it by using a vaccum pump. Water raises to a height of 10.34 cm due to the atmospheric pressure. One end of a pipe is placed in the water at the ground. When the other end is connected to vacum pump water raises up due to atmospheric pressure. The water can be filled in the tank.

Topper's Solved these Questions

HYDROSTATICS
PEARSON IIT JEE FOUNDATION|Exercise Level 3|10 Videos
HYDROSTATICS
PEARSON IIT JEE FOUNDATION|Exercise TEST YOUR CONCEPTS (VERY SHORT ANSWER TYPE QUESTIONS)|43 Videos
HYDROSTATICS
PEARSON IIT JEE FOUNDATION|Exercise Level 1|45 Videos
HEAT
PEARSON IIT JEE FOUNDATION|Exercise CONCEPT APPLICATION Level 3 |10 Videos
KINEMATICS
PEARSON IIT JEE FOUNDATION|Exercise CONCEPT APPLICATION (Level 3) (Application Based Questions ) |5 Videos

Similar Questions

Explore conceptually related problems

A 10 H.P. motor pumps out water from a well of depth 20 m and fills a water tank of volume 22380 litres at a height of 10 m from the ground. The running time of the motor to fill the empty water tank is ( g=1=ms^(-2) )

An electric pump is used to fill an overhead tank of capacity 9m3 kept at a height of 10 m above the ground. If the pump takes 5 min to fill the tank by consuming 10 kW power, the efficiency of the pump should be

Calculate the electric energy consumed by a 2 HP pump if it is used for 2 hours. If the group is used to fill an overhead tank, which is at a mean height of 10 m , find the quantity of water lifted by the pump. (Take g = 10 ms^(-2) ).

If the power of the motor of a water pump is 3kW , then the volume of water in llitres that can be lifted to a height of 10 m in one minute by the pump is (g = 10 ms^(-2))

A motor pump lifts 6 tonnes of water from a height of 25 m to a height 35m from the ground floor in 20 seconds. The power of the pump (in kW) is [g = 10 ms^(-2)]

Water is filled in a tank upto 3 m height. The base of the tank is at height 1 m above the ground. What should be the height of a hole made in it, so that water can be sprayed upto maximum horizontal distance on ground?

PEARSON IIT JEE FOUNDATION-HYDROSTATICS-Level 2

When a Fortins barometer is used to measure the pressure on the surfac...
Text Solution
|
In the following figures, state which of the cases is possible, discus...
Text Solution
|
The 10% of total volume of the barometer liquid (mercury) contains imp...
Text Solution
|
The density of ice is 901 kg m^(-3). What percentage of ice lies below...
Text Solution
|
A car is lifted by a hydraulic jack that consists of two pistons. The ...
Text Solution
|
An object of weight 500 kg(wt) is lifted by using a hydraulic press. T...
Text Solution
|
It is advised not to stand near a running train. Why?
Text Solution
|
A constant immersion hydrometer floats vertically in water when the we...
Text Solution
|
At the mount of the tap area of cross-section is 2.0cm^(2) and the spe...
Text Solution
|
When a metallic sphere is released from the surface of water filled in...
Text Solution
|
The relative density of pure gold is 19.3. When an ornament made of go...
Text Solution
|
Why gas filled balloons rise up, only to a certain height ?
Text Solution
|
A needle or a pin floats on the surface of water because of
Text Solution
|
A man can lift a maximum weight of 30 kg("wt"). In order to lift an ob...
Text Solution
|
An effort applied on the small piston of a hydraulic jack lifts the lo...
Text Solution
|
Suggest a method to fill water in a tank constructed at a height of 10...
Text Solution
|
A pressure exerted by mercury at the bottom of a container of area of ...
Text Solution
|
A cuboid of dimensions 3 m xx 2m xx 1m is placed on a surface such tha...
Text Solution
|
A body is immersed in a liquid of relative density 2.6. It is found th...
Text Solution
|