Water level is maintained ina cylindrical vessel up to a fixed height H. The vessel is kept on a horizontal plane. At what height above the bottom should a hole be made in the vessel so that the water stream coming out of the hole strikes the horizontal plane at the greatest distance from the vessel.

In a container, filled with water upto a height h, a hole is made in the bottom. The velocity of water flowing out of the hole is

Water and mercury are filled in two cylindrical vessels up to same height. Both vessels have a hole in the wall near the bottom. If upsilon_(1) and upsilon_(2) are the velocity of water and mercury coming out of the holes, find the relaton between upsilon_(1) and upsilon_(2) .

Water and mercury are filled in towi cylinderical vessels up to same height. Both vesels hve a hole in thewal near the bottom. The velocity of water and mercury coming out of the holes are v_1 and v_2 respectively.

A wide cylindrical vessel 50cm in height is filled with water and rests on a table. Assuming the viscosity to be negligible, find at what height from the bottom of the vessel a small hole should be perforated for the water jet coming out of it to hit the surface of the table at the maximum distance l_(max) from the vessel. Find l_(max) .

A cylindrical vessel is filled with a liquid up to a height H. A small hole is made in the vessel at a distance y below the liquid surface as shown in figure. The liquid emerging from the hole strike the ground at distance x

A cylindrical vessel of cross section A contains water to a height h. There is a hole in the bottom of radius 'a'. The time in which it will be emptied is:

Water is filled in a tank upto 3 m height. The base of the tank is at height 1 m above the ground. What should be the height of a hole made in it, so that water can be sprayed upto maximum horizontal distance on ground?