A screw gauge has a least count of 0.005 mm and its head scale is divided into 200 equal division. The distance between consecutive threads on the screw is:

A spherometer has a least count of 0.005 mm and its head scale is divided into 200 equal divisions. The distance between consecutive threads on the spherometer screw is :

The least count of a screw gauge is 0.005mm and it has 100 equal divisions on its head scale. Then the distance between two consecutive threads on its screw is

A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale: The pitch of the screw gauge is:

A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale: The pitch of the screw gauge is:

Pitch of a screw gauze instrument is 0.5 mm and its circular scale is divided into 100 divisions. The least count of the instrument will be

The pitch of a screw gauge is 0.5 mm and the head scale is divided in 100 parts. What is the least count of screw gauge ?

1 mm of a main scale is divided into 10 equal divisions. The least count of the callipers is 0.005 cm, then the vernier scale must have

The pitch of a screw gauge is 1mm and its cap is divided into 100 divisions. When this screw gauge is used to measure the diameter of a wire, then main scale reading is 2 mm and 58^(th) division of circular scale coincides with the main scale. There is no zero error in the screw gage. Then the diameter of the wire is

The pitch of a screw gauge is 1mm and its cap is divided into 100 divisions. When this screw gauge is used to measure the diameter of a wire, then main scale reading is 2 mm and 58^(th) division of circular scale coincides with the main scale. There is no zero error in the screw gage. Then the diameter of the wire is