Home
Class 10
MATHS
Half of a cuboidal water tank with lengt...

Half of a cuboidal water tank with length of 2· 1 m and breadth of 1·5 m is filled with water. If 630 litres water is poured more into the tank, then calculate the depth of water that will be increased by.

Promotional Banner

Similar Questions

Explore conceptually related problems

Half of the cuboidal water tank with length 2.1m and breadth of 1.5m is filled with water. If 630 lit water is poured more into the tank, then calculate and write the depth that will be increased by.

A cuboidal shaped water tank, 2.1 m long ans 1.5 broad is hald filled with water. If 630 liters more half is poured into that tank, the water level will rise

A rectangular tank whose length and breadth are 2.5 m and 1.5 m respectively is half full of water. If 750 litre more water is poured into the tank, what is the height through which water level further goes up ?

If 64 water filled buckets of equal measure are taken out from a cubical water fiUed tank, then 1/3 rd of water remains in the tank. If the length of one edge of the tank is 1 ·2 m, then calculate the quantity of water that can be hold in each bucket ?

A water tank is 13 m long, 14 m wide and 10 m deep. It is filled with water to a level of 5 m, what part of the tank is empty?

The capacity of a cuboidal water tank is 1,00,000 litres. If its length is 5 m and breadth is 4 m, find its height.

The capacity of a cuboidal water tank is 1,00,000 litres. If its length is 5 m and breadth is 4 m, find its height.

A tank with length 10 m, breadth 8 m and depth 6 m is filled with water upto top . If G=10m//s^2 . And density of water =1000kg//m^3 , then the thrust on the bottom is:

The daily requirements of water of three families in our three-storyed flat are 1200 litres, 1050 litres and 950 litres respectively. After fulfilling these requirements in order to put up a tank again and to deposit to store 25 % of the required water, only a land having the length of 2·5 m and breadth of 1 ·6 m has been procured. Calculate the depth of the tank in metre that should be made. If the breadth of the land would be more by 4 dcm, then calculate the depth of the tank to be made.