The diode used in the circuit shown in t...

The diode used in the circuit shown in the adjacent figure has a constant voltage drop of 0.5V at all currents and a maximum power rating of 100mW.What should be the value of resistor R connected in series with the diode for obtaining maximum current?

`1.5 Omega`

`5 Omega`

`6.67 Omega`

`200 Omega`

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

SEMICONDUCTOR AND DEVICE
FIITJEE|Exercise SOLVED PROBLEMS Objective: Level-I|20 Videos
SEMICONDUCTOR AND DEVICE
FIITJEE|Exercise ASSIGNMENT PROBLEMS( objective : Level-I)|41 Videos
ROTATIONAL MECHANICS
FIITJEE|Exercise COMPREHENSION - IV|2 Videos
SIMPLE HARMONIC MOTION
FIITJEE|Exercise Assignment Problems (Objective) (Level-II)|20 Videos

Similar Questions

Explore conceptually related problems

The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor R, connected in series with the diode, for obtaining maximum current put less I. ?

The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating fo 100 milliwatts. What should be the value of the resistor R , connected in series with the diode for obtaining maximum current?

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

A p-n junction diode when forward biased has a drop of 0.4 V which is assumed to be independent of current. A current excess of 10 mA through the diode damages (burns ) the diode. If we want to use a 2 V battery to forward bias the diode, what should be the value of resistor used in series with the diode so that the maximum current does not exceed 5 mA?

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

A p-n junction diode when forward biased has a drop of 0.5V which is assumed to be independent of current. The current in excess of 10mA through the diode produces a large Joule heating which damages (burns) the diode. If we want to use a 1.5V battery to forward bias the diode, what should be the vlaue of resistor used in series with the diode so that the maximum current does not exceed 5mA ?

A p-n junction when forward biased has a drop of 0.6 V which is assumed to be independent of current. The current in excess of 10 mA through the diode produces a large joule heating effect which burns the diode. If we want to use 1.5 V battery to forward bias the diode, what should be the value of resistor used in series with the diode so that the maximum current does not exceed 6 mA?

In the circuit shown in figure, if the A diode forward voltage drop is 0.3 V, the voltage difference between A and B is

FIITJEE-SEMICONDUCTOR AND DEVICE-ASSIGNMENT PROBLEMS( objective : Level-II)

If a p-n junction diode is reverse biased, then the resistance measure...
Text Solution
|
A common emitter transistor amplifier has a current gain of 50. If the...
Text Solution
|
The current gain of a transistor in a common emitter circuit is 40.The...
Text Solution
|
The current gain for transistor working as a common base amplifier i...
Text Solution
|
In an intrinsic semiconductor at room temperature, number of electrons...
Text Solution
|
If the two ends p and n of a p-n diode junction are joined by a wire, ...
Text Solution
|
The valence band and conduction band of a solid overlap at low tempera...
Text Solution
|
The diode used in the circuit shown in the adjacent figure has a const...
Text Solution
|
A semiconductor X is made by dopping a germanium crystal with arsenic ...
Text Solution
|
A common-emitter amplifier is designed with an n-p-n transistor (alpha...
Text Solution
|
The dominant mechanisms for motion of charge carriers in forward and r...
Text Solution
|
If the forward voltage in a semiconductor is doubled, the width of dep...
Text Solution
|
In a transistor circuit, when the base current is increased by 50mu A ...
Text Solution
|
In the adjacent figure, the potential difference between A and B is
Text Solution
|
From the following transistor characteristics, what can be inferred?
Text Solution
|
In Question 26, for VCE=0 the above graph lines will be
Text Solution
|
What can be said from graph below?
Text Solution
|
If critical frequency is 20 MHz for ionosphere, calculate the angle of...
Text Solution
|
A carrier wave of amplitude A is used to modulate (amplitude) the sign...
Text Solution
|
Which of the following is not a transducer?
Text Solution
|