The hydraulic press shown in the figure is used to raise the mass `M` through a height of 5.0 mm by performing 500 J of work at the small piston. The diameter of the large piston is 10 cm while that of the smaller one is 2 cm. The mass M is

The hydraulic press shown in the figure is used to raise the mass M through a height of 0.5 cm by performing 500J of work at the small piston. The diameter of the large piston is 10cm , while that of the smaller one is 2 cm . The mass M is

The hydraulic press shown in the figure is used to raise the mass M through a height of 0.5 cm by performing 500J of work at the small piston. The diameter of the large piston is 10cm , while that of the smaller one is 2 cm . The mass M is

Shows a hydraulic press with the larger piston of diameter 35cm at a height of 1.5 m relative to the smaller piston of diameter 10cm. The mass on the smaller piston is 20gk. What is the force exerted on the load by the lerger piston ? The density of oil in the press is 750 "kgm"^(-3).

Figure shown a hydraulic press with the larger piston if diameter 35 cm at a height of 1.5 cm at a height of 1.5 m relative to the smaller piston of diameter 10cm. The mass on the smaller piston is 20 kg. What is the force exerted on the load by the larger piston? The density of oil in the press is 750 kh//m^(3) . (Take g=9.8 m//s^(2)) .

A hydraulic press with the larger piston of diameter 35 cm at a heigth of 1.5 m relative to the smaller piston of diameter 10 cm. The mass on the smaller piston is 20 kg. What is the force exerted on the load placed. On the larger piston ? The density of oil in the press is 750 kg m^(-3)

A hydraulic press with the larger piston of diameter 35 cm at a heigth of 1.5 m relative to the smaller piston of diameter 10 cm. The mass on the smaller piston is 20 kg. What is the force exerted on the load placed. On the larger piston ? The density of oil in the press is 750 kg m^(-3)

Figure shows a hydraulic press which the larger piston of diameter 35 cm at a height of 1.5 m relative to the smaller piston of diameter 10 cm. The mass on the smaller piston is 20 kg. What is the force exerted on the load by the larger piston. The density of oil in the press is 750 kg//m^(3) . Takes g = 9.8 m//s^(2) .

The diameter of smaller piston of a hydraulic press is 3 cm that of a larger piston is 20cm. If a weight of 50 kg f is placed on the smaller piston, what will be the force exerted by the larger piston? If the stroke of smaller piston is 5cm, calculate the distance through which the larger will move after 6 strokes?

A hydraulic press can lift 100 kg when a mass 'm' is placed on the smaller piston. It can lift _____kg when the diameter of the larger piston is increased by 4 times and that of the smaller piston is decreased by 4 times keeping the same mass 'm' on the smaller piston.