A copper strip `AB` and an iron strip `AC` are joined at `A`. The junction `A` is maintained at `0^@ C` and the free ends `B and C` are maintained at `100^@ C`. There is a potential difference between

Two rods A and B of different materials but same cross section are joined as in figure. The free end of A is maintained at 100°C and the free end of B is maintained at 0°C. If l_2=2l_1,K_1=2K_2 and rods are thermally insulated from sides to prevent heat loses then the temperature theta of the junction of the two rods is

Figure shows an aluminium rod joined to a copper rod. Each of the rods has a length of 20cm and area of ccross section 0.20cm^(2) . The junction is maintained at a constant temperature 40^(@)C and the two ends are maintained at 80^(@)C . Calculate the amount of heat taken out from the cold junction in one minute after the steady state is reached. The conductivities are K_(Al)=200Wm^(-1) ^(@)C^(-1) . and K_(Cu)=400Wm^(-1) ^(@)C^(-1) .

Figure shows an aluminium rod joined to a copper rod. Each of the rods has a length of 20cm and area of cross section 0.20cm^(2) . The junction is maintained at a constant temperature 40^(@)C and the two ends are maintained at 80^(@)C . Calculate the amount of heat taken out from the cold junction in one minute after the steady state is reached. The conductivities are K_(Al)=200Wm^(-1)C^(-1) . and K_(Cu)=400Wm^(-1)C^(-1) .

Figure shows an aluminium rod joined to a copper rod. Each of the rods has a length of 20cm and area of cross section 0.20cm^(2) . The junction is maintained at a constant temperature 40^(@)C and the two ends are maintained at 80^(@)C . Calculate the amount of heat taken out from the cold junction in one minute after the steady state is reached. The conductivities are K_(Al)=200Wm^(-1)C^(-1) . and K_(Cu)=400Wm^(-1)C^(-1) .

The end A of rod AB of length 1 m is maintained at 80^(@) C and the end B at 0^(@) C. The temperature at a distance of 60 cm from the end A is

A rod AB is 1m long. The temperature of its one end A is maintained at 100^(@) C and other end B at 10^(@) C, the temperature at a distance of 60 cm from point B is

A rod AB is 1m long. The temperature of its one end A is maintained at 100^(@) C and other end B at 10^(@) C, the temperature at a distance of 60 cm from point B is

Two rods of material, x and two of y are connected as shown in the figure. All the rods are indentical in length and cross-sectional area. If the end A is maintained at 80^(@)C and the end D is maintained at 10^(@)C , calculate the temperature of the junctions B and C in the steady state. Thermal conductivity of x is double that of y .