Home
Class 11
PHYSICS
A hole is drilled in a copper sheet. The...

A hole is drilled in a copper sheet. The diameter of the hole is 4.24cm at `27.0^(@)C`. What is the change in the diameter of the when the sheet is heated to `227^(@)C`? Coefficient of linear expansion of copper `=1.70xx10^-5""^(@) C^(-1)`?

Text Solution

Verified by Experts

The diameter increases by an amount ` = 1.44 xx 10^(-2) cm`.
Promotional Banner

Similar Questions

Explore conceptually related problems

A copper plate has an area of 250 cm^2 at 0^(@) C. Calculate the area of this plate at 60^(@)C .Given coefficient of linear expansion of copper= 1.7xx10^(-5)^(@) C

A steel tape Im long is correctly calibrated for a temperature of 27.0 ^(@) C . The length of a steel rod measured by this tape is found to be 63.0 cm on a hot day when the temperature is 45.0^(@) C .What is the actual length of the steel rod on that day? What is the length of the same steel rod on a day when the temperature is 27.0^(@) C ? Coefficient of linear expansion of steel = 1.20 xx 10^(-5) K^(-1) .

A brass rod of length 50 cm and diameter 3.0 mm is joined to a steel rod of the same length and diameter. What is the change in length of the combined rod at 250 ^(@) C . if the original lengths are at 40.0 ^(@) C ? Is there a "thermal stress developed at the junction ? The ends of the rod are free to expand (Co-efficient of linear expansion of brass = 2.0 xx 10^(-5) K^(-1) , " steel " = 1.2 xx 10^(-5) K^(-1)) .

A brass wire 1.8 m long at 27 ^(@) C is held taut with little tension between two rigid supports. If the wire is cooled to a temperature of - 39 ^(@) C . what is the tension developed in the wire, if its diameter is 2.0 mm ? Co-efficient of tear expansion of brass = 2.0 xx 10^(-5) K^(-1) , Young's modulus of brass = 0.91 xx 10^(11) Pa.

A large steel wheel is to be fitted on to a shaft of the same material. At 27 ^(@) C , the outer diameter of the shaft is 8.70 cm and the diameter of the central hole in the wheel is 8.69 cm. The shaft is cooled using dry Icel. At what temperature of the shaft does the wheel slip on the shaft? Assume coefficient of linear expansion of the steel to be constant over the required temperature range: alpha_("steel ") = 1.20 xx 10^(-5) K^(-1) .

A blacksmith fixes Iron ring on the rim of the wooden wheel of a horse cart. The diameter of the rim and the fron ring are 5.243 m " and " 5.231 m, respectively at 27 ^(@)C . To what temperature should the ring be heated so as to fit the rim of the wheel?(linear coefficient of expansion=1.20*10^-5 /K)

A steel tape 1 m long is correctly cailbrated for temperature of 27.0^(@)C . The length of a steel rod measured by this tape is found to be 63.0 cm on a hot day when the termperature is 45.0^(@)C . What is the actual length of the steel rod on that day? What is the length of the same steel rood on a day when the temper ature is 27.0^(@)C ? alpha of steel is 1.20xx10^(-5)""^(@)C^(-1) ?

At room temperature (27.0^(@)C) the resistance of a heating element is 100 Omega. What is the temperature of the element if the resistance is found to be 117 Omega. given that the temperature coefficient of the material of the resistor is 1.70 xx 10 ^(-4)"" ^(@)C^(-1).