Depth of a cylindrical vessel can be measured by using Vernier Callipers by the help of

Reading A Vernier Calliper

Introduction Of Vernier Callipers

The diameter of a cylinder is measured using a vernier callipers with no zero error . It is found that the zero of the vernier scale lies between 5.10 and 5.15 cm of the main scale . The 24 th division of the vernier scale exactly coincides with one of the main scale divisions . The diameter of the cylinder is

STATEMENT 1 meter of a cylinder measured using a Vernier caliper is more accurate than that measure using a meter scale STATEMENT-2 Least count of vernier calliper is in ser than least count of a meter scale.

What is the least measurement of a vernier calliper?

The least count of a vernier callipers is :

The diameter of a spherical bob is measured using a vernier callipers . 9 divisions of the main scale ,in the vernier callipers ,are equal to 10 divisions of vernier scale .One main scale division is 1 mm . The main scale reading is 10mm and 8th division of vernier scale was found to coincide exactly with one of the main scale division .If the given vernier callipers has positive zero error of 0.04 cm , then the radius of the bob is __________ xx10^(-2) cm.

The side of a cubical block when measured with a vernier callipers is 2.50 cm. The vernier constant is 0.01 cm. The maximum possible error in the area of the side of the block is