A square metal plate with a hole is at temperature `theta` is present on smooth horizontal surface. Point `P & C` are marked on the plate, where C is centre of mass of the plate with the hole shown. When temperature of the plate is increased then the point.

Temperature of plate is increased by Delta theta then find new

A uniform plate with a circular hole lies over a smooth horizontal surface. C is the center of the plate and X is at the edge of the plate,as shown.Now,if the temperature of the plate is increased

A uniform metallic rod lies on a smooth horizontal surface. C is centre of mass of rod and A is a point on the rod. As the temperature increase

The figure shows a rectangular brass plate at 0^@C . in which there is cut a rectangular hole of dimensions indicated .if the temperature of the plate is raised to 150^@C , then

A circular hole in an aluminium plates is 3.115 cm in diameter at 0.000^@C . What is its diameter when the temperature of the plate is raised to 180.0^@C ?

A square plate and a circular plate made up of same meterial are placed touching each other an a horizontal table. If the side length of square plate is equal to diameter of the circular plate then the centre of mass of the system will be

A uniform rectangular plate of mass m which is free to rotate about the smooth vwerticle hinge passing through the centre and perpendicular to the plate, is lying on a smooth horizontal surface. A particle of mass m is moving with speed 'u' collides with the plate and sticks to it as shown in figure. The angular velocity of the platye after colli9sion will be

A uniform rectangular plate of mass m which is free to rotate about the smooth vwerticle hinge passing through the centre and perpendicular to the plate, is lying on a smooth horizontal surface. A particle of mass m is moving with speed 'u' collides with the plate and sticks to it as shown in figure. The angular velocity of the platye after colli9sion will be