A tank of large base area is filled with water up to a height of `5 m`. A hole of `2 cm^(2)` cross section in the bottom allows the water to drain out in continuous streams. For this situation, mark out the correct statement(s) (take `rho_("water")=1000kg//m^(3),g=10ms^(-12))`

A tank of square cross section (2mxx2m) is filled with water up to a height of 2.5 m . Find the thrust experienced by the vertical and botom of the tank (g=10m//s^(2)) .

A tank of square cross section (2mxx2m) is filled with water up to a height of 2.5 m . Find the thrust experienced by the vertical and botom of the tank (g=10m//s^(2)) .

The water level on a tank is 5m high. There is a hole of 1 cm^(2) cross-section at the bottom of the tank. Find the initial rate with which water will leak through the hole. ( g= 10ms^(-2) )

The water level on a tank is 5m high. There is a hole of 1 cm^(2) cross-section at the bottom of the tank. Find the initial rate with which water will leak through the hole. ( g= 10ms^(-2) )

A cylindrical tank with a large diameter is filled with water to a depth D =0.30 m. A hole of cross-sectional area A = 6.2 cm^(2) in the bottom of the tank allows water to drain out. (a) What is the drainage rate in cubic meters per second? (b) At what distance below the bottom of the tank is the cross-sectional area of the stream equal to one half the area of the hole?

The level of water in a tank is 5 m high . A hole of the area 10 cm^2 is made in the bottom of the tank . The rate of leakage of water from the hole is

The level of water in a tank is 5 m high . A hole of the area 10 cm^2 is made in the bottom of the tank . The rate of leakage of water from the hole is

A tank of height 5 m/s completely filled with water. There is a hole of cross sectional area 1cm^2 near its bottom. What is the initial volume of water that will come out of the hole per second. (Use g= 10m//s^2 )