Home
Class 11
PHYSICS
Two narrow bores of diameters 3.00mm and...

Two narrow bores of diameters 3.00mm and 6.0mm are joined together to form a U-tube open at both ends. If the U-tube contains water, what is the difference in its levels in the two limbs of the tube? Surface tension of water at the temperature of the experiment is `7.3 times 10^-2 N m^-1`.Take the angle of contact to be zero and density to water to be `1.0 times 10^3 kg m^-3`

Text Solution

Verified by Experts

For the first bore, pressure difference (between the concave and convex side)=`2 times 7.3 times 10^-3/3 times 10^-3=48.7 Pa` Similarly for the second base, pressure difference =97.3 Pa Consequently the level difference in the two bores is `(48.7//(10^3 times 9.8)) m=5.0mm`
the level in the narrower bore is higher.(Note for zero angle of contract,the radius of the meniscus equals of the bore. The concave side of the surface in each bore is at 1atm)
Promotional Banner

Topper's Solved these Questions

  • MECHANICAL PROPERTIES OF FLUIDS

    NCERT GUJARATI|Exercise EXERCISE|31 Videos
  • LAW OF MOTION

    NCERT GUJARATI|Exercise EXERCISE (ADDITIONAL EXERCISE)|17 Videos
  • MECHANICAL PROPERTIES OF SOLIDS

    NCERT GUJARATI|Exercise Exercises|16 Videos

Similar Questions

Explore conceptually related problems

Two narrow bores of diameters 3.0 mm and 6.0mm are joined together to form a U- tube open at both ends . If the U- tube contains water , what is the difference in its levels in the two limbs of the tube ? Surface tension of water at the temperature of the experiment is 7.3xx10^(-2)Nm^(-1) . Take the angle of contact to be zero and density of water to be 1.0xx10^(3)kgm^(-3)(g=9.8ms^(-2)) .

The lower end of a capillary tube of diameter 2.00 mm is dipped 8.00 cm below the surface of water in a beaker . What is the pressure required in the tube in order to blow a hemispherical bubble at the end in water ? The surface tension of water at temperature of the experiments is 7.30xx10^(-2)Nm^(9-1) . 1 atmospheric pressure =1.01xx10^(5)Pa . Density of water =1000kg//m^(3),g=9.80ms^(-2) . Also calulate the excess pressure .

The lower end of a capallary tube of diameter 2.50 mm is dipped 8.00 cm below the surface of water in a beaker .What is the pressure required in the tube in order to blow a hemispherical bubble at the end in water ? The surface tension of water at temperature of the experiments is 7.30xx10^(-2)Nm^(-1) . 1 atmospheric pressure 1.01xx10^(5)Pa . Density of water =1000kg//m^(3),g=9.80ms^(-2) .Also calculate the excess pressure .

In the previous problem, If 15.0 cm of water and spirit each are further poured into the respective arms of the tube, what is the difference in the levels of mercury in the two arms?

Mercury has an angle of contact equal to 140^(@) with soda lime glass . A narrow tube of radius 1.00 mm made of this glass is dipped in a trough containing mercury .By what amount does the mercury dip down in the tube relative to the liquid surface outside ? Surface tension of mercury at the temperature of the experiment is 0.465Nm^(-1) . Density of mercury =13.6xx10^(3)kgm^(-3)

An open U-tube contains mercury. When 11.2 cm of water is poured into one of the arms of the tube, how high does the mercury rise in the other arm from its initial level ?

In the previous problem , if 15.0 cm of water and spirit each are further poured into the respective arms of the tube , what is the difference in the levels of mercury in the two arms ? (Specific gravity of mercury =13.6)

Two vertical glass plates 1 mm apart are dipped into water. How high will the water rise between the plates. If the surface tension of water is 70 dyne cm^(-1)

Diameters of the arms of a U tube are 10 mm and 1 mm . It is partially filled with water and it is held in a vertical plane . Find the difference in heights of water in both the arms . (Surface tension of water =70 dyne cm^(-1) angle of contact =0^(@).g=980cms^(-2))

NCERT GUJARATI-MECHANICAL PROPERTIES OF FLUIDS -EXERCISE
  1. Can Bernoulli's equations be used to describe the flow of water throug...

    Text Solution

    |

  2. Does it matter if one uses gauge instead of absolute pressures in appl...

    Text Solution

    |

  3. Glycerine flows steadly through a horizontal tube of length 1.5 m and ...

    Text Solution

    |

  4. In a test experiment on a model aeroplane in a wind tunnel, the flow s...

    Text Solution

    |

  5. Figures 10.23(a) and (b) refer to the steady flow of a (non-viscous) l...

    Text Solution

    |

  6. The cylindrical tube of a spray pump has a cross section of 8.0 cm^2 o...

    Text Solution

    |

  7. A U-shaped wire is dipped in a soap solution, and removed. The thin so...

    Text Solution

    |

  8. Figure 10.24(a) shows a thin liquid film supporting a small weight =4....

    Text Solution

    |

  9. What is the pressure inside the drop of mercury of radius 3.00mm at ro...

    Text Solution

    |

  10. What is the excess pressure inside a bubble of soap solution of radius...

    Text Solution

    |

  11. A tank with a square base of area 1.0 m^2 is divided by a vertical pos...

    Text Solution

    |

  12. A manometer reads the pressure of a gas in an enclosure as shown in fi...

    Text Solution

    |

  13. Two vessels have the same area but different shapes. The first shapes ...

    Text Solution

    |

  14. In deriving Bernoulli's equation, we equated the work done on the flui...

    Text Solution

    |

  15. What is the largest average velocity of blood flow in an artery of rad...

    Text Solution

    |

  16. A plane is in level flight at constant speed and each of its two wing...

    Text Solution

    |

  17. In Millikan's oil drop experiment. What is the terminal speed of an un...

    Text Solution

    |

  18. Mercury has an angle of contact equal to 140^@ with soda lime glass. A...

    Text Solution

    |

  19. Two narrow bores of diameters 3.00mm and 6.0mm are joined together to ...

    Text Solution

    |

  20. It is known that density rho of air decreases with height y as rho=r...

    Text Solution

    |